Mini RGB LED Controller - Dynamic Color-Changing Modes - 4 Amps/Channel - Mini RGB LED Controller
Part Number
MCB-RGB4
Overview
Universal Red/Green/Blue (RGB) LED Mini Controller & Dimmer with on board buttons can control any 12VDC RGB LED products. 20 static color modes with dimming controls and 19 dynamic color-changing modes with Speed controls. Maximum load is 4 Amps per channel - 12 Amps total. 4-pin RGB pigtail connector included.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Specifications
| Amps | 12.00 Amps |
|---|---|
| Amps Per Channel | 4 Amps/CH |
| Channels | 3 Channels |
| Control Type | In-line Wired |
| Input Connection Type | Pigtail |
| Voltage | 12 VDC |
Product Specifications
| Applications | Specific color selection or color change with speed control modes and dimming capabilities for accent lighting |
| Function | Dim and control 3 channel RGB LED products from 10~100% using PWM with controller unit |
| Operating Voltage | 5~24 Volts DC |
| Connection Mode | Common anode (+) |
| Output | 3 channel RGB (4-pin port) |
| Maximum Load Current | 4 Amps/channel (12 Amps total) |
| Output Power | 144W @ 12V |
| Overall Size | (L)40 x (W)13 x (H)5 mm |
| Control Method | Controller buttons (no remote) |
| Modes | 39 total (20 static and 19 dynamic) |
| Operating Temperature | -25~60°C |
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$3.99 ea.12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-DIn stockUse this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.85 per Foot22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire Part Number: RGB-4WireIn stock22 Gauge Wire - Four Conductor RGB Power Wire. Use for connecting and lengthening segments of RGB LED Light strips and RGB Controllers. Price per foot. -
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$49.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12VIn stockClass 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case. -
View all
All Accessories1 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$3.99 ea.12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-DIn stockUse this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders.
-
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$49.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12VIn stockClass 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case. -
$13.99 ea.Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1JIn stockUse the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and over-voltage and has a 5.5mm barrel connector output and standard 1-15P 120 VAC input. Available in 18 or 25-watt maximum output. -
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$21.99 ea.Mean Well LED Switching Power Supply - RS Series 50W Enclosed LED Power Supply - 12V DC Part Number: RS-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$53.99 ea.Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed Power Supply with Built-in PFC - 12V DC Part Number: RSP-x-12In stock* Universal AC input / Full range
* Built-in active PFC function, PF>0.93
* Protections: Short circuit / Overload / Over voltage / Over temperature
* Built-in constant current limiting circuit
* Remote ON-OFF control(Optional)
* LED indicator for power on
* 100% full load burn-in test
* Fixed switching frequency at PFC:67KHz PWM:134KHz
* 3 years warranty
* Made by Mean Well
-
$23.99 ea.Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
View all
12V Power Supplies15 additional compatible accessories
-
$0.85 per Foot22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire Part Number: RGB-4WireIn stock22 Gauge Wire - Four Conductor RGB Power Wire. Use for connecting and lengthening segments of RGB LED Light strips and RGB Controllers. Price per foot.
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
Reviews
4.4 / 5 stars
8 reviews
4.4 / 5 stars
8 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*