Adjustable LED Hardscape Light - Selectable CCT - Bronze - Up to 450 Lumens - 4” / 7” / 12” - 2700K / 3000K / 3500K / 4000K / 5000K
Features
- Adjustable housing pivots 270° to preciesly aim the light beam
- Field-selectable CCT for customizable light
- Durable aluminum construction with bronze finish
- Delivers even, uniform lighting in a 95º beam angle
- Included stainless steel mounting bracket is removable for direct surface mounting
Try asking:
Loading recommendations...
Overview
Product Details:
- Bronze finished aluminum housing with polycarbonate lens
- 95° beam angle
- IP65 waterproof rating
- 12 VAC, 12-24 VDC
- ETL listed
- 5-year warranty
- Decks
- Downlighting
- Outdoor Accent Lights
- Outdoor Kitchens
- Patios
- Railings
- Retaining Walls
- Step Lighting
- Walkways
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Try asking:
Specifications
| Ambient Operating Temperature | -20 to 40 °C (-4 to 104 °F) |
|---|---|
|
Beam Angle
Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
95° |
|
CCT
CCT
![]() |
2700K, 3000K, 3500K, 4000K, 5000K, Selectable CCT |
| Certifications/Compliance | ETL Listed |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Suitable for Wet Locations, Waterproof |
| Finish | Bronze |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
![]() |
IP65 |
| LED Color | Warm White, Natural White, Cool White, Selectable White |
| LED Lifetime | 40000 Hours |
| Mount Type | Surface Mount |
| Operating Voltage | 12 VAC, 12-24 VDC |
| Product Materials | Aluminum Housing, Polycarbonate Lens, Stainless Steel Bracket |
| Warranty | 5 Year |
| Wire Gauge | 20 AWG |
| Part NO |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
Length | Lumens | Wattage |
|---|---|---|---|---|
| LFA-HA04-SW5A | 170 mA @ 12 VDC, 240 mA @ 12 VAC | 4 in. (0.33 ft) | 150 Lumens | 2 Watts |
| LFA-HA04-SW5A-8PK | 170 mA @ 12 VDC, 240 mA @ 12 VAC | 4 in. (0.33 ft) | 150 Lumens | 2 Watts |
| LFA-HA07-SW5A | 375 mA @ 12 VDC, 540 mA @ 12 VAC | 7 in. (0.58 ft) | 310 Lumens | 4.5 Watts |
| LFA-HA07-SW5A-8PK | 375 mA @ 12 VDC, 540 mA @ 12 VAC | 7 in. (0.58 ft) | 310 Lumens | 4.5 Watts |
| LFA-HA12-SW5A | 580 mA @ 12 VDC, 830 mA @ 12 VAC | 12 in. (1 ft) | 450 Lumens | 7 Watts |
| LFA-HA12-SW5A-8PK | 580 mA @ 12 VDC, 830 mA @ 12 VAC | 12 in. (1 ft) | 450 Lumens | 7 Watts |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs


