Name: 5m Tunable White LED Strip Light - LED Tape Light - 24V - IP64 Weatherproof - Tunable White - 196.9in (16.40ft)
Brand: Super Bright LEDs
SKU: STW-H80-B12C-10C5M-24V
Price: 94.99 USD
Availability: InStock
Rating: 4.5 (2 reviews)

Overview

Color changing LEDs allow this Dynamic Color series Strip Light to adjust to the exact white color desired, from a warm 3000K to cool 6500K. Match existing white lights with minimum hassle, or change the temperature to create different moods throughout the day. The tunable white tape light is rated for use in places that may be exposed to splashes or debris, like bathrooms, bars, or under cabinets. Low voltage options are ideal for vehicle interiors or boat cabins. Fully dim and control with a compatible remote or switch, and easily adhere with 3M™ backing.

Product Details:

Tunable from 3000K-6500K
Dimmable
Max run: 5m at 12V, 7m at 24V
50000 hours L70 lifespan
Rated IP64 against wet conditions
UL Listed
Lifetime warranty

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

LED Backlights
Task Lighting
Accent Lighting
Off Grid Lighting
Retail
Coves
Under-Cabinets
Bias Lighting
Display Cases
Trade Shows

Specifications

Ambient Operating Temperature	-20~+45 °C (-4~+113 °F)
CCT Value	2700-6500K
Certifications/Compliance	CE, UL Listed
Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.	Tunable CCT
CRI	80+
Dimmable	Yes
Environmental Rating Learn more about environmental rating	Suitable for Wet Locations, Weatherproof
Finish	White
IP Rating	IP64
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Density	36 LEDs/ft
LED Type	3528 SMD
Length	16.4ft (5m)
Rated Life (L70)	50000 Hours
Series	DynamicColor
Strip Width	10mm (0.39in)
Wire Length	483mm (19in)

Print Specifications

Part NO	Brightness	Current Draw Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	Current Draw per Foot Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	Efficacy	LEDs per Segment	Max Run (Class 2) Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	Minimum Cut Length	Operating Voltage	Power Consumption	Wattage per Foot
STW-H80-B12C-10C5M-24V	350 lm/ft (1148 lm/m)	2.62A (2620mA)	160mA	82 lm/W	12	Up to 23ft (7m)	100mm (3.9in)	24 VDC	63 Watts	3.8 W/ft (12.5 W/m)
STW-H80-B6C-10C5M-12V	302 lm/ft (990 lm/m)	6A (6000mA)	366mA	69 lm/W	6	Up to 16.4ft (5m)	50mm (1.97in)	12 VDC	72 Watts	4.3 W/ft (14 W/m)

Accessories & Power Supplies

All Accessories

Controllers

Power Supplies

Installation Supplies

Housings

Connectors

Accessories Links

Accessory Category

Accessory Type:

$4.99 ea.

3M Adhesion Promoter - Single Pack Part Number: 06396
In stock

3M Adhesion Promoter 06396 is a liquid primer used for enhancing adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. 3M Adhesion Promoter 06396 is specifically formulated for automotive applications. It comes in an easy-to-use sponge applicator packet. The liquid contents of the packet should be completely used as soon as possible after opening. Apply promoter only to areas that will be fully covered with tape. The primer should be dry before applying tape. For best results, apply tape immediately after primer application or no more than one hour after primer application. Be sure the primed surfaces remain free from contaminants prior to tape application.
$0.99 per Foot

PVC Jacketed 18 Gauge Wire - Three Conductor Power Wire - 18 AWG - 3 Wire Part Number: WP18-3CMR
In stock

This 3-conductor, 18-gauge power wire is designed for low-voltage variable color temperature LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.
$0.99 per Foot

Flat Power Wire - 3 Conductor - 10mm - NFLS10-FPW-3 (per foot) Part Number: NFLS10-FPW-3
Out of stock

This flat power cable is designed for creating discrete light installations with tunable white LED strip lights. Easily hide it under paint, wallpaper, spackle, trim, and molding. The 3-conductor wire can be used for powering 10-mm LED strip lights, connecting strip segments, and more. Easily secure this flat power cable to any surface with its adhesive backing, and forget about mounting wire clips. The power wire can carry 6 amps of current per channel and has a max run of 10'. This power wire has a solder point every 19.5".

$1.49 ea.

Solderless Clamp On LED Strip Light to Pigtail Adapter - 10mm Tunable White Strips - 22-18 AWG - STN10-3PC Part Number: STN10-3PC
In stock

Use this solderless adapter to connect your 10-mm tunable white LED strip light to 22-18 gauge pigtail power wire. The clear connector easily clamps onto strip ends and pigtail wire with out stripping insulation. A secure-snap closure holds wire and strip in place.
$0.69 ea.

Solderless Clamp On Pigtail Adapter for 10mm Tunable White LED Strip Lights - 8" - STN10-3SCPT-20 Part Number: STN10-3SCPT-20
In stock

Use this solderless pigtail adapter to connect your 10-mm tunable white LED strip light to power. The adapter has 8" power wire and a secure-snap closure that holds the strip end securely in place.
$0.59 ea.

Direct Connect for 10mm Tunable White LED Strip Lights - STN10-3SCSC Part Number: STN10-3SCSC
In stock

Use this direct connect to join 10-mm tunable white LED strip lights. Black tabs slide out and secure strip end in place when they're slid back into position.

Reviews

90%

4.5 / 5 stars

2 reviews

Write Your Own Review

Write a Review

You're reviewing: 5m Tunable White LED Strip Light - LED Tape Light - 24V - IP64 Weatherproof - Tunable White - 196.9in (16.40ft)

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

5m Tunable White LED Strip Light - LED Tape Light - 24V - IP64 Weatherproof - Tunable White - 196.9in (16.40ft)

Features

Product Photos

Videos