CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter
Part Number
CPS-x2ST
Overview
Description
CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
Specifications
| Conductors | 2 |
|---|---|
| Connector Type | CPS Barrel Connector, Power Adapter |
| Input Connection Type | Screw Terminal |
| Max Current | 6 A |
| Output Connection Type | 5.5 mm x 2.1 mm DC Barrel |
Accessories & Power Supplies
Accessories Links
Accessory Category-
$1.99 ea.CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2STIn stockCPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies. -
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$1.49 ea.CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PTIn stockPigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length. -
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$2.49 ea.CPS-EXTx series Power Cable Extensions Part Number: CPS-EXTxIn stockCPS-EXTx extension cable for CPS power supplies or BPS-12VDC-x battery power supplies with 5.5mm barrel connector. Available in 100cm(39.3in) or 300cm(118in) length and is for low voltage DC cables. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each. -
$4.49 ea.CPS-MxF Compact Power Supply to Splitter Cable Part Number: CPS-MxFIn stock1 female 5.5mm barrel connector to 2 or 4 male 5.5mm barrel connectors for our CPS series power supplies. Easily power multiple products with one Compact Power Supply. 52.07cm(20.5in) length. -
$5.99 ea.CPS-MxFSW Compact Power Supply to In-line Switch Part Number: CPS-MxFSWIn stockPlug and Play in-line switch for CPS series power supplies and products. ON/OFF switch with 1 female and 1 or 2 male 5.5mm barrel connectors. 5 amps max at 12VDC. 31.75cm(12.5in) wire length. -
$6.99 ea.Single Color LED Controller with Dynamic Modes - CPS - Mini LED Dimmer Part Number: MLD-5A-CPSIn stockUniversal single color mini LED dimmer and dynamic mode controller can dim any 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). Includes controller mounted push buttons for mode, speed and brightness adjustment. Features 8 dynamic flashing modes with adjustable speeds and power cycle mode retention. Maximum load is 5 Amps. Features 3.5" CPS power plug for easy plug and play installation. Price for each. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
View all
All Accessories33 additional compatible accessories
-
$1.99 ea.CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2STIn stockCPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies. -
$1.49 ea.CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PTIn stockPigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
-
$2.49 ea.CPS-EXTx series Power Cable Extensions Part Number: CPS-EXTxIn stockCPS-EXTx extension cable for CPS power supplies or BPS-12VDC-x battery power supplies with 5.5mm barrel connector. Available in 100cm(39.3in) or 300cm(118in) length and is for low voltage DC cables. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
-
$4.49 ea.CPS-MxF Compact Power Supply to Splitter Cable Part Number: CPS-MxFIn stock1 female 5.5mm barrel connector to 2 or 4 male 5.5mm barrel connectors for our CPS series power supplies. Easily power multiple products with one Compact Power Supply. 52.07cm(20.5in) length. -
$5.99 ea.CPS-MxFSW Compact Power Supply to In-line Switch Part Number: CPS-MxFSWIn stockPlug and Play in-line switch for CPS series power supplies and products. ON/OFF switch with 1 female and 1 or 2 male 5.5mm barrel connectors. 5 amps max at 12VDC. 31.75cm(12.5in) wire length. -
$6.99 ea.Single Color LED Controller with Dynamic Modes - CPS - Mini LED Dimmer Part Number: MLD-5A-CPSIn stockUniversal single color mini LED dimmer and dynamic mode controller can dim any 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). Includes controller mounted push buttons for mode, speed and brightness adjustment. Features 8 dynamic flashing modes with adjustable speeds and power cycle mode retention. Maximum load is 5 Amps. Features 3.5" CPS power plug for easy plug and play installation. Price for each.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
View all
Connectors30 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$4.99 ea.3M Adhesion Promoter - Single Pack Part Number: 06396In stock3M Adhesion Promoter 06396 is a liquid primer specifically formulated for automotive applications that enhances adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. The sponge applicator packet is easy to use and makes an ideal choice for LED strip light and aluminum extrusion installations.
-
$0.49 ea.Flathead Screwdriver Part Number: SDF-x2In stockGeneral purpose flathead screwdriver. Nickel plated with acetate clear handle. Available with blue, red, or green accents. Measures 86mm(3.39 in) x 12.70mm(0.50 in) x 12.70mm(0.50 in).
Reviews
4.7 / 5 stars
103 reviews
4.7 / 5 stars
103 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*