5m Single Color LED Strip Light - Radiant Series LED Tape Light - 12V / 24V - IP20
Part Number:
RA-IP20-Color-5m
Manufacturer Part Number:
Starting at
$74.99
ea.
Starting at
Was
| Quantity | |
|---|---|
In Stock
Features
- 5050 SMD LEDs offer superior brightness
- 3M™ adhesive backing for surface mounting
- 0-100% dimmable
- Lifetime warranty
Frequently Bought Together
Total Price:
Loading...
Overview
This flexible LED strip light produces brilliant red, green, or blue illumination and is a top choice for ambient and accent lighting. It brightens and enhances the aesthetics of any indoor space. The peel-and-stick 3M™ adhesive backing enables fast, easy mounting. It is backed by a lifetime warranty.
Product Details:
- 80+ CRI rating ensures vibrant, natural-looking color tones
- 18 LEDs/ft
- 12V input for operation with a vehicle; 24V for longer runs
- Run 12V strips up to 5 m; run 24V strips up to 7 m
- Strip width measures 10 mm
- Lifetime exceeds 50000 hours
- CE certified and UL listed
- Lifetime warranty
Documents
RA-IP20-Color-5m Specification Sheet 
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Ambient Operating Temperature | -20~+45 °C (-4~+113 °F) |
|---|---|
| Certifications/Compliance | CE, UL Listed |
| Dimmable | Yes |
| Dimmer Type | PWM |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
|
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Density | 18 LEDs/ft |
| LED Type | 5050 SMD |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
| Series | Radiant |
| Strip Width | 10mm (0.39in) |
| Wattage | 64 Watts |
| Wattage per Foot | 3.9 W/ft |
| Wire Length | 1.7 ft (51.8 cm) |
| Part NO |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
LED Color | LEDs per Segment |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
Minimum Cut Length | Operating Voltage |
|---|---|---|---|---|---|---|---|
| STN-BBLU-A3A-10B5M-12V | 5.3 A | 325mA | Blue | 3 | Up to 16.4ft (5m) | 50mm (1.97in) | 12 VDC |
| STN-BBLU-A6A-10B5M-24V | 2.7 A | 163mA | Blue | 6 | Up to 23ft (7m) | 100mm (3.9in) | 24 VDC |
| STN-BGRE-A3A-10B5M-12V | 5.3 A | 325mA | Green | 3 | Up to 16.4ft (5m) | 50mm (1.97in) | 12 VDC |
| STN-BGRE-A6A-10B5M-24V | 2.7 A | 163mA | Green | 6 | Up to 23ft (7m) | 100mm (3.9in) | 24 VDC |
| STN-BRED-A3A-10B5M-12V | 5.3 A | 325mA | Red | 3 | Up to 16.4ft (5m) | 50mm (1.97in) | 12 VDC |
| STN-BRED-A6A-10B5M-24V | 2.7 A | 163mA | Red | 6 | Up to 23ft (7m) | 100mm (3.9in) | 24 VDC |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
