5m Single Color LED Side Emitting Strip Light - 12V - IP65 - Red - 196.9in (16.40ft)

Name: 5m Single Color LED Side Emitting Strip Light - 12V - IP65
Brand: Super Bright LEDs
SKU: STW-BSx-E3D-05C5M-12V
Price: 69.99 USD
Availability: InStock

Part Number

STW-BSRED-E3D-05C5M-12V

Features

Side oriented LEDs for side view illumination
Convenient surface mounting with adhesive backing
Low energy consumption
Dimmable 0-100%
12 VDC
UL Listed, Lifetime warranty

View more details

Free Shipping

On orders $300 and up within the contiguous U.S.
Read More

Item does not qualify

Add to Wish List

Skip to the end of the images gallery

9 photos

Skip to the beginning of the images gallery

Overview

Description

with 12 VDC, STN series Side Emitting Strip Light is rated for outdoor use, to bring visibility or accent to decks, pathways, or architecture. Illuminating parallel to flat surfaces with out showing the strip, all color options are designed to emit sideways beams. This field cuttable tape light has flexible construction and 3M™ adhesive backing, giving it the convenient versatility to enhance any outdoor space.

Product Details:

Cuttable in 1” segments
Available in red, green, blue
12 VDC
IP65 rated for wet conditions
50000 hours L70 lifespan
UL Listed
Lifetime warranty

Applications

Backlighting
Bias Lighting
Cove Lighting
Display Cases
Entryways
Off Grid Lighting
Stairways
Trade Shows
Under-Cabinets

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

Specifications

Ambient Operating Temperature	-20~+45 °C (-4~+113 °F)
Certifications/Compliance	UL Listed
Current Draw The current draw of your lights is calculated using the amount of power your light needs (wattage) and system voltage using the following formula: Watts/Volts = amps or W/V = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A. Choosing LED bulbs with the correct amperage ensures proper operation and prevents damage to your electrical system or the bulbs. See your vehicle owner's manual for amperage, wattage, and voltage information, or match the information on your existing bulbs.	3 A
Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	91mA
Dimmable	Yes
Environmental Rating Learn more about environmental rating	Suitable for Wet Locations, Waterproof
Finish	White
Input Connection Type	5.5 mm x 2.1 mm DC Barrel, Pigtail
IP Rating	IP65
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Density	36 LEDs/ft
LED Type	3014 SMD
LEDs per Segment	3
Light Length	16.4ft (5m)
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	Up to 16.4ft (5m)
Minimum Cut Length	25mm (1.0in)
Operating Voltage	12 VDC
Power Consumption	36 Watts
Rated Life (L70)	50000 Hours
Strip Width	5mm (0.20in)
Wattage per Foot	2.2 Watts

Print Specifications

Part NO	Color/CCT Color/CCT Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.
STW-BSBLU-E3D-05C5M-12V	Blue
STW-BSGRE-E3D-05C5M-12V	Green
STW-BSRED-E3D-05C5M-12V	Red

Accessories & Power Supplies

Reviews

0 / 5 stars

0 reviews

Customer Submitted Photos

Write Your Own Review

Write a Review

You're reviewing: 5m Single Color LED Side Emitting Strip Light - 12V - IP65 - Red - 196.9in (16.40ft)

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs