5m Single Color COB LED Strip Light - COB Series LED Tape Light - 24V - IP20
Quantity | |
---|---|
Features
- New COB LED Technology produces seamless linear light - no diffused cover needed
- High-density design with 156 LEDs/ft (512 LEDs/m)
- Lowest profile strip solution for light with out LED hotspots
- 24 VDC for longer max run
- Also available in white CCT options
Frequently Bought Together
Loading recommendations...
Overview
Also available with IP65 rating for outdoor application.
- Strip width: 8mm
- 3Mâ„¢ adhesive backing
- Flexible COB design for highly adaptable mounting
- 2.46 in. (62.5 mm) segment length
- 24 VDC input voltage
- 50 W total (3.05 with ft)
- Max run: 24.6 ft (7.5 m)
- 0-100% dimmable
- Connection: pigtail
- 180° beam angle
- UL Listed
- IP20 Rated for dry conditions
- 5-year warranty
- Backlighting
- Building Exteriors and Facades
- Cove Lighting
- Display Cases
- Displays
- Light Design
- Reflective Surfaces
- Retail Shops
- Stage & Theaters
- Toe Kick Lighting
- Trade Shows
- Under-Cabinets
COB
COB (Chip-on-Board) LEDs integrate multiple LED chips onto a single module, offering higher brightness and better light distribution in larger lighting installations. This design makes them excellent for high-output applications. Typically, they also have a higher density, producing a "line of light" illumination, making them ideal for lighting reflective surfaces like polished countertops or glass retail displays.
Specifications
Ambient Operating Temperature | -20~+40 °C (-4~+104 °F) |
---|---|
Certifications/Compliance | UL Listed |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
2.1 A |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
127mA |
Dimmable | Yes |
Dimmer Type | PWM |
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
Finish | White |
Input Connection Type | Pigtail |
IP Rating
IP Rating
|
IP20 |
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
180° |
LED Density | 156 LEDs/ft |
LED Type | COB (chip-on-board) |
LEDs per Segment | 32 |
Length | 16.4 ft (5 m) |
LED Lifetime | 30000 Hours |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. |
Up to 24.6ft (7.5m) |
Minimum Cut Length | 62.5mm (2.46in) |
Operating Voltage | 24 VDC |
Series | COB |
Strip Width | 8mm (0.31in) |
Wattage | 50 Watts |
Wattage per Foot | 3.1 W/ft |
Wire Length | 1.7 ft (51.8 cm) |
Part NO | LED Color |
---|---|
STN-BBLU-O32A-08L5M-24V | Blue |
STN-BGRE-O32A-08L5M-24V | Green |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs