Narrow Rigid LED Light Bar with High Power 3-Chip SMD LEDs - 690 Lumens
Part Number:
RLBN-x30X3SMD
Manufacturer Part Number:
Starting at
$12.99
ea.
Starting at
Was
In Stock
Overview
Rigid linear LED light bars are an extremely versatile solution for a variety of lighting needs, such as cabinet lighting, under-cabinet lighting, cove lighting, task lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other indoor applications where space is limited. These 1-7/8' light bars use 5050 SMD LEDs to emit up to 690 lumens of cool white, natural white, warm white, blue, or red illumination. The non-weatherproof light fixtures have 12 VDC operation and can be cut into 1-LED segments. Easily join up to 10 fixtures together with compatible interconnect cables (sold separately).
Documents
RLBN-x30X3SMD Specification Sheet Applications:
- Bookshelves
- Cabinets
- Cove Lighting
- Off Grid Lighting
- Showcases
- Trade Shows
- Under-Cabinets
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products that have an International Solid-State Lighting Alliance (ISA) label are approved as quality, energy-efficient LED lights that help to create a sustainable society.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Certifications/Compliance | ISA Approved, UL Listed |
|---|---|
| Dimmable | Yes |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
| Input Connection Type | RLBN |
|
IP Rating
IP Rating
|
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Type | 5050 SMD |
| LEDs per Segment | 1 |
| LED Lifetime | 30000 Hours |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
10 |
| Operating Voltage | 12 VDC |
| Strip Width | 8mm (0.31in) |
| Wattage | 7 Watts |
| Part NO |
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
LED Color | Lumens Per Foot | Wattage per Foot |
|---|---|---|---|---|---|---|
| RLBN-B30X3SMD | 550 mA | 294mA | Blue | 3.5 W/ft | ||
| RLBN-CW30X3SMD | 7500K | 560 mA | 299mA | Cool 7500K | 325 lm/ft | 3.6 W/ft |
| RLBN-NW30X3SMD | 4000K | 520 mA | 278mA | Natural 4000K | 342 lm/ft | 3.3 W/ft |
| RLBN-R30X3SMD | 550 mA | 294mA | Red | 3.5 W/ft | ||
| RLBN-WW30X3SMD | 3000K | 550 mA | 294mA | Warm 3000K | 308 lm/ft | 3.5 W/ft |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
