3m Digital RGB LED Strip Light - Single Addressable Color-Chasing LED Tape Light - 5V - IP20 - RGB
Features
- 5050 RGB LEDs - individually addressable with integrated WS2811 IC chips
- Single chip color chasing capabilites with compatible controller
- Use Magic-LED Bluetooth Controller (sold separately) and app to control 200 unique chase patterns
- 3Mâ„¢ adhesive backing for surface mounting
- 3m total length | 90 total LEDs
- 5 VDC
Loading recommendations...
Overview
Magic-LED Bluetooth Controller requires Magic-LED app and compatible Bluetooth equipped device with at least iOS 8.0 or Android 4.4 installed. Magic-LED app compatible with both Apple and Android smartphones.
- Available in IP67 waterproof version
- 5 VDC input
- Max run: 9.8ft (3m)
- 1 LED/segment
- Cuttable segment length: 1.31in
- Density: 9 LEDs/ft
- Strip width: 12mm
- 0-100% dimmable
- IP20 rated for dry conditions
- 36000 hours L70 lifespan
- UL Listed
- 5 year warranty
- Interior Design
- Light Design
- Light Shows
- Sign Lighting
- Venues
RGB Addressable
RGB Addressable LEDs allow for custom control of individual LEDs or segments, allowing for a more expansive range of solid colors and color-changing modes than standard RGB lights.
Addressable LEDs are controlled via a digital signal that specifies the color and brightness of each LED. While they can be controlled by various microcontrollers, using specific libraries simplifies the process, and sometimes dedicated controllers are used for more complex applications.
Specifications
Ambient Operating Temperature | -20~+45 °C (-4~+113 °F) |
---|---|
Certifications/Compliance | CE, UL Listed |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
4.3 A |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
440mA |
Dimmable | Yes |
Dimmer Type | PWM |
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
Finish | White |
Input Connection Type | Pigtail |
IP Rating
IP Rating
|
IP20 |
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
LED Color | Color Chasing RGB |
LED Density | 9 LEDs/ft |
LED Type | 5050 SMD |
LEDs per Segment | 1 |
Length | 9.8 ft (3 m) |
LED Lifetime | 36000 Hours |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. |
Up to 9.8ft (3m) |
Minimum Cut Length | 33.3mm (1.31in) |
Operating Voltage | 5 VDC |
Series | DreamColor |
Strip Width | 10mm (0.39in) |
Wattage | 21.6 Watts |
Wattage per Foot | 2.2 W/ft |
Wire Length | 1.6 ft (48.7 cm) |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs