ETi 6" Selectable CCT LED Recessed Downlight with Nightlight Trim - 10W Retrofit Ceiling Light - Dimmable - 670 Lumens
| Quantity | |
|---|---|
Features
- NightlightR trim provides ultra-warm white ambient lighting
- Retrofit existing cans with E26 adapter
- Color Preference selectable CCT
- 90+ CRI for excellent color rendering
- IC-rated for direct contact with insulation
- Energy Star Certified
Overview
The ETi 6-inch Color Preference® downlight with nightlight trim is a baffled retrofit downlight. The Energy Star Certified fixture delivers 670 lumens while consuming only 10 watts, replacing a traditional 60-watt incandescent. The downlight has five color temperatures, 2700K, 3000K, 3500K, 4000K, and 5000K, selectable via a switch on the back of the light. Use the wall switch to change from the primary light to the 2000K NightlightR trim light, which delivers an ultra-warm ambient light on the ceiling around the fixture. Easily install the TRIAC dimmable fixture in existing recessed housings with the included E26 screw adapter.
NightLightR operation: Turn the light switch off and back on again in three seconds or less to switch between downlight and nightlight modes. If used with a dimmer, the switch must be set to the maximum output for proper nightlight function.
Product Details:
- Aluminum housing, polycarbonate lens
- IP64 weatherproof, suitable for wet locations
- 100° beam angle
- 90+ CRI
- TRIAC dimmable
- 120 VAC
- Certified by UL
- Energy Star Certified
- 5-year warranty
DL-6-67-907-SV-D 5000K IES File 
DL-x-x-907-SV-D User Manual - Basements
- Bathrooms
- Closets
- Hallways
- Kitchens
- Living Rooms
- Night Light
- Residential Downlights
This product meets California Energy Commission (CEC) Title 20 requirements and is registered in their Modernized Appliance Efficiency Database System (MAEDbS).
CEC California Title 20 mandates that consumer products sold in the state meet specified energy efficiency standards, aiming to reduce energy consumption and promote environmental sustainability. Manufacturers must ensure their products consume less energy while maintaining or improving performance compared to less efficient models to comply with these regulations.
- CRI 82 or higher
- Compliance score 297 or higher
- Minimum L/W 45 (GSL) or 80 (SLED, SSDL)
- Power factor greater than 0.7
- Hour rated life greater than 10,000 hours (25,000 for MR16s)
- ENERGY STAR® V2.0 omnidirectional light distribution for A-bulbs
- ENERGY STAR V1.1 light distribution for decorative bulb shapes
- Dimmable bulbs: Dimmable to 10%, reduce flicker, noise less than 24 dB at 100% and 20%
Need help?
Use our Lighting Layout Tool to see how this product illuminates your space.
Specifications
| Ambient Operating Temperature | -15°~40° C (5°~104° F) |
|---|---|
| Beam Angle | 100° |
| Brand | ETi |
| Can Size | 6 inch |
|
CCT
CCT
|
2700K, 3000K, 3500K, 4000K, 5000K, Selectable CCT |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
CEC Title 20 Compliant, Certified by UL, Energy Star |
|
CRI
CRI
|
90+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
100 mA (downlight), 50 mA (nightlight) |
| Dimmable | Yes |
|
Dimmer Type
Dimmer Type
|
TRIAC |
| Efficacy | 67 lm/W |
|
Environmental Rating
Environmental Rating
|
Suitable for Wet Locations, Weatherproof |
| Equivalency | 60 Watt Incandescent |
| Finish | White |
| Input Connection Type | E26 (Medium Base) |
| Integrated Surge Protection | 500 V |
| IC Rated | Yes |
|
IP Rating
IP Rating
|
IP64 |
| LED Color | Warm White, Natural White, Cool White, Selectable CCT |
| Rated Life (L70) | 55000 Hours |
| Lumens | 670 Lumens |
| Manufacturer Part Number | 538041##, 53804102 |
| Operating Voltage | 120 VAC |
| Power Factor | ≥0.9 |
| Product Materials | Aluminum Housing, Polycarbonate Lens |
| UL File Number | E339058, E349551 |
| Warranty | 5 Year |
| Wattage | 4.2 Watts, 10 Watts |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
