8" Recessed LED Downlight with Built-In Junction Box and Baffle Trim - 190 Watt Equivalent - Dimmable - 2,800 Lumens
Part Number:
RLF8D-x35-JB
Manufacturer Part Number:
Starting at
$44.99
ea.
Starting at
Was
In Stock
Features
- +90 CRI
- 185-190W Incandescent Equivalent
- Mounts with or with out existing can light housing
- TRIAC Dimmable
Frequently Bought Together
Total Price:
Loading...
Related Products
Overview
This LED downlight is ideal for retail lighting, commercial lighting, residential lighting, office lighting, kitchen lighting, bathroom lighting, basement lighting, and it comes with a built-in junction box. The powerful LED light is suitable for replacing 8" can lights and is IC rated for safe contact with insulation. The downlight can also be used for new construction or remodel projects and installs easily with out any can housings needed. Use conduit or non-metallic sheathed cables with round and square knockouts for installation . The 8-inch LED downlight emits up to 2,800 lumens. A high color-rendering index (CRI) of 92, the LED fixture shows the true colors of fabric, objects, and surroundings. This energy-efficient LED light consumes 35 watts of power and is comparable to a 185-190 watt incandescent bulb.
Product Details:
- Low-heat aluminum housing with matte white finish
- IP44, Suitable for damp locations
- +90 CRI for precise color rendering
- Easy spring clip installation
- 120 VAC
- Lifetime exceeds 50000 hours
- ETL Listed, IC rated, FCC compliant
- 5-year warranty
RLF Series Specification Sheet 
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Specifications
| Ambient Operating Temperature | -30 to 50 °C (-22 to 122 °F) |
|---|---|
| Beam Angle | 90° |
| Brand | Super Bright LEDs |
|
CCT
CCT
|
3000K |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
ETL Listed, FCC |
|
CRI
CRI
|
90+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
280 mA |
| Dimmable | Yes |
|
Dimmer Type
Dimmer Type
|
TRIAC |
| Efficacy | 74 lm/W |
|
Environmental Rating
Environmental Rating
|
Suitable for Damp Locations, Weatherproof |
| Equivalency | 190 Watt Incandescent |
| Finish | White |
| Input Connection Type | Pigtail |
| IC Rated | Yes |
|
IP Rating
IP Rating
|
IP44 |
| LED Color | Warm White |
| Rated Life (L70) | 50000 Hours |
| Lens Color | Frosted |
| Lens Type | Polycarbonate |
| Lumens | 2600 Lumens |
| Operating Voltage | 120 VAC |
| Product Materials | Aluminum |
| Warranty | 5 Year |
| Wattage | 35 Watts |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
