Discontinued
We have discontinued this product permanently. Please find suggested replacement products from below section.
ETi 11" SnapFit Low Profile Selectable CCT LED Downlight with Nightlight Trim - 14W Flush Mount Ceiling Light - Dimmable - 900 Lumens
Part Number:
FMNL-11IN-900LM-8-CP3-SV-TD-WT
Manufacturer Part Number:
56572113
Discontinued
Features
- Innovative SnapFit system - flush mount to a standard junction box
- NightlightR trim provides ultra-warm white ambient lighting
- Color Preference selectable CCT
- Low-profile flush mount design with decorative trim
- IC-rated for direct contact with insulation
Related Products
Overview
The ETi 11-inch SnapFit LowPro Color Preference® downlight with nightlight trim is a low-profile flush mount downlight with the innovative SnapFit mounting system and a decorative molded trim. The energy-efficient fixture delivers 900 lumens while consuming only 14 watts, replacing a traditional 75-watt incandescent. The downlight has three color temperatures, 3000K, 4000K, and 5000K, selectable via a switch on the back of the fixture. The SnapFit design allows you to install the bracket in a standard junction box, wire the fixture, and snap it in place for easy installation. Use the wall switch to change from the primary light to the 2000K NightlightR trim light, which delivers an ultra-warm ambient light on the ceiling around the fixture. The TRIAC dimmable fixture is IC-rated for direct contact with insulation.
NightLightR operation: Turn the light switch off and back on again in three seconds or less to switch between downlight and nightlight modes. If used with a dimmer, the switch must be set to the maximum output for proper nightlight function.
Product Details:
- Polycarbonate housing, PMMA lens
- IP20, suitable for damp locations
- 120° beam angle
- 80+ CRI
- TRIAC dimmable
- 120 VAC
- ETL Listed and ETL Classified
- 5-year warranty
Documents
FMNL-11IN-900LM-8-CP3-SV-TD-WT User Manual Applications:
- Basements
- Bathrooms
- Closets
- Hallways
- Kitchens
- Living Rooms
- Residential Downlights
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Specifications
| Ambient Operating Temperature | -20 to 40 °C (-4 to 104 °F) |
|---|---|
| Beam Angle | 120° |
| Brand | ETi |
|
CCT
CCT
|
3000K, 4000K, 5000K, Selectable CCT |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
ETL Classified, ETL Listed |
|
CRI
CRI
|
80+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
140 mA (downlight) |
| Dimmable | Yes |
|
Dimmer Type
Dimmer Type
|
TRIAC |
| Efficacy | 64 lm/W |
|
Environmental Rating
Environmental Rating
|
Suitable for Damp Locations |
| Equivalency | 75 Watt Incandescent |
| Finish | White |
| Input Connection Type | Pigtail |
| Integrated Surge Protection | 500 V |
| IC Rated | Yes |
|
IP Rating
IP Rating
|
IP20 |
| LED Color | Warm White, Natural White, Cool White, Selectable CCT |
| Rated Life (L70) | 50000 Hours |
| Lumens | 900 Lumens |
| Manufacturer Part Number | 56572113 |
| Mount Type | Flush Mount |
| Operating Voltage | 120 VAC |
| Power Factor | ≥0.9 |
| Product Materials | PMMA Lens, Polycarbonate Housing |
| Warranty | 5 Year |
| Wattage | 14 Watts |
| Wire Gauge | 18 AWG |
Reviews
Customer Submitted Photos
