LED Combo Box Light Kit - Multi-Function Truck and Trailer Light with License Plate Light - Universal Mount LED Brake/Turn/Tail Lights - Stud Mount

Multi-Function LED Truck and Trailer Lights Combo Box with License Plate Light - Stop / Turn / Tail Lights - Universal Stud Mount

Part Number
LBL-R16W18-K

Features

  • 2 LED light modules included
  • One light equipped with white license plate side light
  • 9-14.8 VDC
  • Lifetime warranty
View more details
In Stock

$84.95 / kit

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Loading...

Overview

Use both Multi-Function Combo Box lights for a complete vehicle signaling package that meets DOT FMVSS 108 requirements for use as a rear reflex reflector, turn signal/hazard warning lights, reverse lights or back-up lights, Stop lights, and tail lights. Both lights have sonically sealed polycarbonate lenses, weatherproof housings, and red and white LEDs for different functions. One has white side LEDs for side-mount license plate lighting. Kit includes hardware for surface mounting to provide stop, turn, or tail lights on vehicles. Dimensions: 5.75"(14.60cm) x 2.88"(7.30cm) x 6.75"(17.14cm)

Product Details:

  • Sealed polycarbonate
  • IP65 Rated
  • Pigtail connector
  • Surface mount hardware included
  • 9 - 14.8 VDC range
  • DOT, SAE, RoHS compliant
  • Lifetime Warranty
DOT
DOT
Lifetime
Lifetime
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Turn Lights
  • Tail Lights
  • Brake Lights
  • Emergency Vehicle Lighting
  • Semi-Truck Light
  • Freightliner Light
  • Flatbed Truck Lights
  • Trailer Lights
  • Tow Truck Lights
  • Box Truck Lights
  • RV Lights
  • Campers
  • Service Vehicle Lighting

Specifications

Current Draw Red Low: 61mA Red High: 125mA White: 142mA All: 316mA
DOT Standard FMVSS 108
IP Rating IP65
Mount Type Stud
Standards And Certifications DOT Compliant
Voltage 9-14.8 VDC
PC Rated No
Print Specifications

Accessories & Power Supplies

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  3. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  4. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  5. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  6. View all

    All Accessories

    1 additional compatible accessories

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  3. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  4. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  5. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  6. View all

    Installation Supplies

Reviews

5 / 5 stars
2 reviews

Write Your Own Review

Write a Review

You're reviewing: Multi-Function LED Truck and Trailer Lights Combo Box with License Plate Light - Stop / Turn / Tail Lights - Universal Stud Mount

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.