RGB Neon LED Strip Light - Dual Bend Neon Flex - IP67 - 16mm Wide - 24V - 5m
Part Number:
NFDB-CRGB-16C5M-24V
Manufacturer Part Number:
$159.99
ea.
Was
In Stock
Features
- Flexible neon strip replaces traditional fragile glass tubes
- Color-changing RGB for a range of accent lighting options
- Dual bend flexible design - bend or twist into custom shapes
- IP67 waterproof - fully encased in silicone
- Customized mounting, wiring, and more with available accessories
Frequently Bought Together
Total Price:
Loading...
Overview
The RGB Neon LED Strip Lights provide the look of traditional neon lighting. Fully encased in silicone, these durable dual-bend neon strip lights are safer and more efficient than traditional neon glass tubes. The dual bend strips can be twisted, flexed, and cut into segments to create unique shapes for custom installations. The strips offer a continuous "line of light" with multiple color-changing RGB lighting options. To customize the strips, cut along the designed lines every 1.97 inches (50 mm). The strips have a minimum bending diameter of 11 inches for side bend installations and 4.72 inches for top bend installations, with a maximum twist of 360 degrees per 3.3 feet. The max run is one 16.4-foot (5-meter) strip. The IP67 waterproof construction makes this strip ideal for use outdoors or in wet locations.
Product Details:
- Continuous line of light without hot spots or shadows
- Dimmable with PWM signal
- Maximum run: 16.4 ft (5 m)
- 24 VDC input
- Lifetime up to 50,000 hours
- UL Listed
- 5-year warranty
NFDB Specification Sheet Applications:
- Accent Lighting
- Cove Lighting
- Retail Shops
- Sign Lighting
- Trade Shows
- Under-Cabinets
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Specifications
| Ambient Operating Temperature | -20 to 45 °C (-4 to 113 °F) |
|---|---|
| Certifications/Compliance | CE, UL Listed |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
2.92 A |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
178mA |
| Dimmable | Yes |
| Dimmer Type | PWM |
|
IP Rating
IP Rating
|
IP67 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Color | RGB |
| LED Density | 36 LEDs/ft |
| LEDs per Segment | 6 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
16.4 ft (5 m) |
| Minimum Cut Length | 50mm (1.97in) |
| Operating Voltage | 24 VDC |
| Strip Width | 16mm (0.63in) |
| Wattage | 70 Watts |
| Wattage per Foot | 4.3 W/ft |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
