Low Profile LED Strobe Light - Grille and Surface Mount - 9W
Part Number:
GS-STRB-x9
Manufacturer Part Number:
Starting at
$19.99
ea.
Starting at
Was
| Quantity | |
|---|---|
Features
- 26 strobe patterns, sync with up to 12 lights
- SAE Class 1 for peak brightness
- CISPR Class 3 certified to prevent electrical interference.
- Memory function recalls last pattern used
- Fully waterproof - IP67/IP69K rated
- Lifetime Warranty
Frequently Bought Together
Total Price:
Loading...
Overview
The 9W Low Profile LED Strobe Light delivers reliable performance with 26 selectable strobe patterns and synchronization capability for up to 12 units. The light features a rugged aluminum housing and a UV-resistant polycarbonate lens built to withstand impact and extreme conditions. IP67/IP69K-rated, this light is protected from dust, submersion, and high-pressure washdowns. The ultra-slim design is 1/4" thick, making it easy to install in tight places. The included gasket protects the mounting surface. Available in Amber, Red, White, Green, Blue, and Purple, it is offered in single or 4-pack options.
Product Details:
- Size: 3.2" (82 mm) x 1.2" (31 mm) x 0.2" (6.6 mm)
- Black aluminum housing
- IP67 waterproof
- IP69K rated for high-pressure, high-temperature spray
- Reverse polarity protected
- Surface mount with included gasket
- 12-24 VDC
- Lifetime Warranty
Applications:
- Emergency Vehicles
- Farm Equipment
- Hazard Lights
- Roadside Assistance Vehicles
- Tractors
- Utility Vehicles
- Warning Lights
- Waste Removal Vehicles
SAE J595 provides design guidelines, test procedure references, and performance requirements for directional, single-color, flashing optical warning devices used on authorized emergency, maintenance, and service vehicles. It is intended to apply to, but not limited to, surface land vehicles. Class 1 is Four times more intense than SAE Class 2 lights and ten times more intense than SAE Class 3 lights. Applications - emergency response vehicles such as police, fire, and ambulance. >8100 candela
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Ambient Operating Temperature | -30~+60 °C (-22~+140 °F) |
|---|---|
|
Beam Angle
Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| Brand | Super Bright LEDs |
| Certifications/Compliance | SAE J595 Class 1, CISPR Class 3 |
|
Current Draw
Current Draw
The current draw of your lights is calculated using the amount of power your light needs (wattage) and system voltage using the following formula: Watts/Volts = amps or W/V = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED bulbs with the correct amperage ensures proper operation and prevents damage to your electrical system or the bulbs. See your vehicle owner's manual for amperage, wattage, and voltage information, or match the information on your existing bulbs. |
750 mA @ 12 VDC |
| Finish | Black |
| Input Connection Type | Pigtail |
| Input Voltage | 12-24 VDC |
|
IP Rating
IP Rating
|
IP67, IP69K |
| Lens Color | Clear |
| Mount Type | Surface Mount |
| Product Materials | Aluminum Housing, Polycarbonate Lens |
| Warranty | Lifetime |
| Wattage | 9 Watts |
| Wire Gauge | 20 AWG |
| Wire Length | 15.75 in. (40 cm) |
| Part NO | LED Color |
|---|---|
| GS-STRB-A9 | Amber |
| GS-STRB-A9-4PK | Amber |
| GS-STRB-B9 | Blue |
| GS-STRB-B9-4PK | Blue |
| GS-STRB-G9 | Green |
| GS-STRB-G9-4PK | Green |
| GS-STRB-P9 | Purple |
| GS-STRB-P9-4PK | Purple |
| GS-STRB-R9 | Red |
| GS-STRB-R9-4PK | Red |
| GS-STRB-W9 | White |
| GS-STRB-W9-4PK | White |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
