Overview

This 5-channel DMX512 and RDM decoder has the ability to decode and control up to 5 different LED products or one RGB+CCT LED strip light. Decoder runs 4 amps per channel, totaling 20 amps or 480W at 24 VDC. Adjust the Gamma dimming curve to either linear or logarithmic for precise dimming. Select between an optional high PWM frequency or a low frequency. Set decoder through the digital display.

Product Details:

Screw terminal connections for input and output
Optional PWM frequency: 2000hz or 500hz
Gamma dimming: 1.0 Linear dimming or 1.6 Logarithmic dimming
12 VDC: 48W per channel, 240W total
24 VDC: 96W per channel, 480W total
Short circuit protection, overcurrent protection, and anti-reverse protection

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UKCA

Name: 5 Channel LED DMX512 and RDM Decoder - 4 A/CH - Digital Display - 12-24 VDC
Brand: Super Bright LEDs
SKU: D5-CX
Price: 24.99 USD
Availability: InStock

Information about the UKCA certification.

Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Amps	20 Amps
Amps Per Channel	4 Amps/CH
Channels	5 Channels
Control Type	RDM Decoder, DMX512
Input Connection Type	Screw Terminals
IP Rating .	IP20
Max Input Current	20.5 A
Operating Temperature	-20~+60 °C (-4~+140 °F)
Standards And Certifications	CE, UKCA
Supported Smart Phone Apps	MiBoxer
Voltage	12-24 VDC

Print Specifications

Accessories & Power Supplies

All Accessories

24V Power Supplies

Installation Supplies

12V Power Supplies

Wiring

Controllers

Accessories Links

Accessory Category

Accessory Type:

$1.99 ea.

CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
In stock

CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
$0.35 ea.

3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
In stock

High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
$0.29 ea.

28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
In stock

Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
$0.21 ea.

22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218
In stock

Use this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
$0.75 ea.

Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
In stock

Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

$0.59 per Foot

PVC Jacketed 22 Gauge Wire - Five Conductor Power Wire - 22 AWG - 5 Wire Part Number: WP22-5CMR
In stock

This 5-conductor, 22-gauge power wire is designed for low-voltage RGBW LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.
$0.49 per Foot

PVC Jacketed 22 Gauge Wire - Three Conductor Power Wire - 22 AWG - 3 Wire Part Number: WP22-3CMR
In stock

This 3-conductor, 22-gauge power wire is designed for low-voltage variable color temperature LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.

$299.99 ea.

SLESA-U9 Standalone DMX RDM Controller - 256 Channels - Software and USB Power Cord Included Part Number: SLESA-U9
In stock

Easily program the standalone DMX controller using a Windows PC or MAC computer. The controller is equipped with two modes of operation: standalone mode and live mode (when controlled via computer). The standalone mode controls up to 256 DMX channels and live mode controls up to 512 channels. Set up 20 scenes and 1 zone using the ESA2 software on a computer. It is USB power-based with 8 dry contact HE10 ports and an XLR3 output port. Standalone function has 20 kb of memory. A USB power cable and programming software are included.
$574.99 ea.

SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U10
In stock

Easily program the standalone DMX controller using a Windows PC or MAC computer. Set up 99 scenes and 1 zone using the ESA2 or ESA2 PRO software on a computer. It is USB power-based with 8 dry contact HE10 ports and two XLR3 output ports. For operation via smartphone or tablet, use in standalone mode and connect the controller to Wi-Fi.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: 5 Channel LED DMX512 and RDM Decoder - 4 A/CH - Digital Display - 12-24 VDC

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

5 Channel LED DMX512 and RDM Decoder - 4 A/CH - Digital Display - 12-24 VDC

Features

Product Photos

Overview

UKCA

Specifications