Warranty Limitations: Product must be rated for application per the Product Data Sheet (PDS); operated ≤16 hrs; in ambient temperatures -4°F to 77°F. If ambient temperatures fall outside the -4°F to 77°F range, the product is has a warranty of 5 years according to the operating temperature range specified on the PDS. Up to $25/unit; registration is required. Additional coverage may be available for purchase; contact MaxLite. Excludes EM/MS versions; component warranty applies.
The MaxLite Round Control Node with a PIR motion sensor and photocell is easy to install in the field with a pre-installed USB-C receptacle in controls-ready fixtures. The control node has a 0-10V dimming method with dim-to-off capacity and daylight harvesting via continuous adjustment mode. Pair with the MaxLite IP Remote Control for easy programming.
The emergency driver automatically provides backup battery power to LED UFO high bay drivers at a rated output voltage of 170 VDC. The internal lithium-ion battery provides backup light for a minimum of 90 minutes and has a 24 hours recharge time. The driver has a wide input voltage of 100-347 VAC. The constant wattage design maintains the output wattage even as the system voltage diminishes. The UL 924 Listed certification meets or exceeds specific safety and fire hazard codes required for commercial properties in the United States. Self-test using the switch on the driver or with an optional RF test remote.
The emergency driver automatically provides backup battery power to LED UFO high bay drivers at a rated output voltage of 170 VDC. The internal lithium-ion battery provides backup light for a minimum of 90 minutes and has a 24 hours recharge time. The driver has a wide input voltage of 100-347 VAC. The constant wattage design maintains the output wattage even as the system voltage diminishes. The UL 924 Listed certification meets or exceeds specific safety and fire hazard codes required for commercial properties in the United States. Self-test using the switch on the driver or with an optional RF test remote.
The MaxLite Round Control Node with a PIR motion sensor and photocell is easy to install in the field with a pre-installed USB-C receptacle in controls-ready fixtures. The control node has a 0-10V dimming method with dim-to-off capacity and daylight harvesting via continuous adjustment mode. Pair with the MaxLite IP Remote Control for easy programming.
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
