Adjustable LED Map Light w/ Switch - Truck RV and Marine Cabin LED Reading Light w/ 1 LED - Pigtail Connector

LED Map Dome Light with Switch - Aimable - 12V / 24V

Part Number
MLAS-WW1-B

Features

  • Adjustable light head
  • Built-in on/off switch
  • Lifetime warranty
View more details
In Stock
$23.99 ea.

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Overview

Use the MLAS aimable LED light to provide visibility inside RVs, boats, and trucks. Adjust the pivoting head up to 12 degrees in all directions to illuminate maps and books. Emits 60 lumens in a narrow 15° beam that keeps the light focused where it is needed with out additional glare. Includes a built-in on/off switch and surface mounts with 2 included screws.
Product Details:
  • Includes 6” pigtail connection
  • Mounting screws included
  • Operating temperature: 14 to +104 °F
  • 10-30 VDC
Lifetime
Lifetime
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

  • Truck And Car Cabin Lights
  • RV Interiors
  • LED Map Lights
  • Interior Vehicle Lights
  • Boat Cabins
  • LED Reading Light

Specifications

Current Draw 0.11A (110mA)
Mount Type Surface
Volts 10~30 VDC
Wire Length 6in(15.2cm)
Print Specifications

Accessories & Power Supplies

  1. 28-12 GA Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  2. LPIR-6A - Mini PIR Motion Sensor Switch
    $12.99 ea.
    Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6A
    Out of stock
    This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is with in 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates with in a 12-24 VDC range. Price for each.
  3. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  4. LED Indicator SPST Round Rocker Switch

    $2.49 ea.
    LED Indicator SPST Round Rocker Switch Part Number: RRS-SPx
    In stock
    ON/OFF Round Rocker Switch with LED indicator, Three 3/16" Male Contact Terminals with #6 screw contacts. Use mating SCFP-2218 3/16" Female Push On Connector. 15 Amp max at 12VDC. Mounting hole 13/16" diameter and fits panels up to 1/8" thick. Price for each.
  5. Automotive Mini Blade Fuses

    $0.25 ea.
    Automotive Mini Blade Fuses Part Number: MAF-x
    In stock
    Miniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available.
  6. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  7. View all

    All Accessories

    1 additional compatible accessories

  1. 28-12 GA Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  2. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  3. Automotive Mini Blade Fuses

    $0.25 ea.
    Automotive Mini Blade Fuses Part Number: MAF-x
    In stock
    Miniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available.
  4. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  5. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  6. View all

    Installation Supplies
  1. LED Indicator SPST Round Rocker Switch

    $2.49 ea.
    LED Indicator SPST Round Rocker Switch Part Number: RRS-SPx
    In stock
    ON/OFF Round Rocker Switch with LED indicator, Three 3/16" Male Contact Terminals with #6 screw contacts. Use mating SCFP-2218 3/16" Female Push On Connector. 15 Amp max at 12VDC. Mounting hole 13/16" diameter and fits panels up to 1/8" thick. Price for each.
  2. LED Rocker Switch Panels with Fuse - Weatherproof DC Distribution Switch Panel
    LED Rocker Switch Panels with Fuse - Weatherproof DC Distribution Switch Panel Part Number: RSP-x
    Out of stock
    These switch panels will enhance the look and organize your 12VDC LED lighting or other low voltage electrical applications for your boat, truck, RV, utility vehicle, recreational vehicle, or even your everyday car. Complete DC distribution panel, wired and ready for install with White or Red LED illuminated rocker switches, fuses, watertight mounting gasket, screws, and a set of 40 common lighting and marine application legends. Select from single switch panel, 3 switch panel, or 4 switch panel.
  1. LPIR-6A - Mini PIR Motion Sensor Switch
    $12.99 ea.
    Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6A
    Out of stock
    This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is with in 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates with in a 12-24 VDC range. Price for each.

Reviews

Write Your Own Review

Write a Review

You're reviewing: LED Map Dome Light with Switch - Aimable - 12V / 24V

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs