MiBoxer Smartphone or Tablet Wi-Fi LED Controller Hub - Wifi Controller
Part Number
WIFI-CON2
Overview
Wi-Fi gateway allows you to control any compatible LED smart bulbs or fixtures with an Apple (iOS) or Android (version 4.3 and above) smartphone or tablet. This device uses the updated MiBoxer app. The gateway must be used with Wi-Fi-compatible LED bulbs or fixtures and can also be used with an RGB, RGBW, or RGB+CCT controller to allow for control of LED strips and other LED lights. Simply plug the Wi-Fi gateway into a computer with the included USB cord or into an outlet by using a USB wall adapter, and download the free MiBoxer app on your Apple or Android device. Connect to the Wi-Fi gateway using your device's Wi-Fi settings, and use the app to sync your LED lights (see PDF instructions for details).
Please note: MiBoxer and MiLight are compatible smart technology brands. Products under these names are able to work interchangeably with each other. This Wi-Fi gateway will work with the new MiLight 3.0 app only, but it is also compatible with any product that was previously controlled by MiLight version 2.0.
Please note: MiBoxer and MiLight are compatible smart technology brands. Products under these names are able to work interchangeably with each other. This Wi-Fi gateway will work with the new MiLight 3.0 app only, but it is also compatible with any product that was previously controlled by MiLight version 2.0.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Home Lighting
- Home Accent Lighting
- Remote Controlled Light
- Smartphone Accessory Light
MiBoxer Smart Ecosystem
Smartphone
or Tablet
MiBoxer
Hub
MiBoxer Smart Lighting Ecosystem
Bring smart lighting to your home or business with the complete line of MiBoxer products. A single WiFi Hub connects to the MiBoxer app, allowing you to control groups of lights both inside and outside from the convenient location of your smartphone or tablet. MiBoxer, previously known as MiLight, has been updated with new features including voice control, and works seamlessly with all previous MiLight devices.
- Control multiple lights remotely to emit thousands of color or white options. Customize the brightness, saturation, and color-changing modes. Schedule lights to turn on and off with the scheduled timer.
- With the app's linking feature, you can group lights and controllers to specific zones to manage multiple devices at a time.
- Third party voice capabilities allow you to control your lights hands-free, using Amazon Alexa or Google Assistant.
Don't Want Smart Controls?
Eliminate the need for the Miboxer hub, smartphone or app with the handheld RF remote control.
Specifications
| Control Type | Smartphone (WiFi or WiFi Gateway) |
|---|---|
| Input Connection Type | USB-A |
| Standards And Certifications | CE, FCC |
| Supported Smart Phone Apps | MiBoxer |
| Volts | 5 VDC |
Documents
Accessories & Power Supplies
Accessories Links
Accessory Category-
$7.99 ea.5V USB Power Adapter Part Number: PSA05A-050QL6In stockUse the low-profile USB power adapter to power a variety of LED lighting products with a USB-A electrical connection. Produces up to 5W with an input of 120 VAC and an output of 5 VDC.
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$17.99 ea.MiBoxer WiFi Smart Multi Zone RGB Controller - 6 Amps/Channel - RGB Controller (Receiver) Part Number: RGB-MZIn stockUniversal Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with out remote. Use to control up to four separate "zones" of RGB LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Gateway. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app. -
$17.99 ea.MiBoxer RGB+Tunable White LED Controller - Color-Changing/Tunable White - WiFi/Smartphone Compatible - 6 Amps/Channel - RGBCCT6-MZ Part Number: RGBCCT6-MZIn stockUse this RBG+Tunable White controller with your RGB+tunable white LED strip lights. Control it with the compatible RF remote or with a Wi-Fi Gateway and your smartphone or tablet (Apple iOS or Android version 4.3 and above). Using these accessories allows you to choose from 9 color-changing/white modes and adjust speed, brightness, saturation, and color temperature. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. Control up to 8 separate light zones. The controller has a maximum load capacity of 6 amps per channel and is compatible with LED light strips that operate on 12-24 VDC. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
-
$17.99 ea.MiBoxer WiFi Smart Multi Zone RGB Controller - 6 Amps/Channel - RGB Controller (Receiver) Part Number: RGB-MZIn stockUniversal Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with out remote. Use to control up to four separate "zones" of RGB LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Gateway. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
-
$17.99 ea.MiBoxer RGB+Tunable White LED Controller - Color-Changing/Tunable White - WiFi/Smartphone Compatible - 6 Amps/Channel - RGBCCT6-MZ Part Number: RGBCCT6-MZIn stockUse this RBG+Tunable White controller with your RGB+tunable white LED strip lights. Control it with the compatible RF remote or with a Wi-Fi Gateway and your smartphone or tablet (Apple iOS or Android version 4.3 and above). Using these accessories allows you to choose from 9 color-changing/white modes and adjust speed, brightness, saturation, and color temperature. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. Control up to 8 separate light zones. The controller has a maximum load capacity of 6 amps per channel and is compatible with LED light strips that operate on 12-24 VDC.
-
$17.99 ea.MiBoxer WiFi Smart Multi Zone RGB Controller - 6 Amps/Channel - RGB Controller (Receiver) Part Number: RGB-MZIn stockUniversal Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with out remote. Use to control up to four separate "zones" of RGB LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Gateway. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
-
$17.99 ea.MiBoxer RGB+Tunable White LED Controller - Color-Changing/Tunable White - WiFi/Smartphone Compatible - 6 Amps/Channel - RGBCCT6-MZ Part Number: RGBCCT6-MZIn stockUse this RBG+Tunable White controller with your RGB+tunable white LED strip lights. Control it with the compatible RF remote or with a Wi-Fi Gateway and your smartphone or tablet (Apple iOS or Android version 4.3 and above). Using these accessories allows you to choose from 9 color-changing/white modes and adjust speed, brightness, saturation, and color temperature. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. Control up to 8 separate light zones. The controller has a maximum load capacity of 6 amps per channel and is compatible with LED light strips that operate on 12-24 VDC.
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
-
$7.99 ea.5V USB Power Adapter Part Number: PSA05A-050QL6In stock
Use the low-profile USB power adapter to power a variety of LED lighting products with a USB-A electrical connection. Produces up to 5W with an input of 120 VAC and an output of 5 VDC.
Reviews
3.5 / 5 stars
7 reviews
3.5 / 5 stars
7 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs