iSensor Proximity Switch - Touchless On-Off Switch - IR Switch
Part Number
TLS-3A
Overview
Universal Infrared Sensor automatically powers on LED Lights when sensor is activated by any object with in 6" infrared detection range. Connect any 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. 3M double sided adhesive included.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Specifications
| Amps | 3 Amps |
|---|---|
| Amps Per Channel | 3 Amps/CH |
| Channels | 1 Channel |
Accessories & Power Supplies
Accessories Links
Accessory Category-
$1.99 ea.CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2STIn stockCPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies. -
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$1.49 ea.CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PTIn stockPigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length. -
$2.49 ea.CPS-EXTx series Power Cable Extensions Part Number: CPS-EXTxIn stockCPS-EXTx extension cable for CPS power supplies or BPS-12VDC-x battery power supplies with 5.5mm barrel connector. Available in 100cm(39.3in) or 300cm(118in) length and is for low voltage DC cables. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
Starting at $4.49 ea.CPS-MxF Compact Power Supply to Splitter Cable Part Number: CPS-MxFIn stock1 female 5.5mm barrel connector to 2 or 4 male 5.5mm barrel connectors for our CPS series power supplies. Easily power multiple products with one Compact Power Supply. 52.07cm(20.5in) length. -
Starting at $5.99 ea.CPS-MxFSW Compact Power Supply to In-line Switch Part Number: CPS-MxFSWIn stockPlug and Play in-line switch for CPS series power supplies and products. ON/OFF switch with 1 female and 1 or 2 male 5.5mm barrel connectors. 5 amps max at 12VDC. 31.75cm(12.5in) wire length. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
$6.99 ea.Single Color LED Controller with Dynamic Modes - CPS - Mini LED Dimmer Part Number: MLD-5A-CPSIn stockUniversal single color mini LED dimmer and dynamic mode controller can dim any 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). Includes controller mounted push buttons for mode, speed and brightness adjustment. Features 8 dynamic flashing modes with adjustable speeds and power cycle mode retention. Maximum load is 5 Amps. Features 3.5" CPS power plug for easy plug and play installation. Price for each. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
View all
All Accessories1 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$1.99 ea.CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2STIn stockCPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies. -
$1.49 ea.CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PTIn stockPigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
-
$2.49 ea.CPS-EXTx series Power Cable Extensions Part Number: CPS-EXTxIn stockCPS-EXTx extension cable for CPS power supplies or BPS-12VDC-x battery power supplies with 5.5mm barrel connector. Available in 100cm(39.3in) or 300cm(118in) length and is for low voltage DC cables. -
Starting at $4.49 ea.CPS-MxF Compact Power Supply to Splitter Cable Part Number: CPS-MxFIn stock1 female 5.5mm barrel connector to 2 or 4 male 5.5mm barrel connectors for our CPS series power supplies. Easily power multiple products with one Compact Power Supply. 52.07cm(20.5in) length. -
Starting at $5.99 ea.CPS-MxFSW Compact Power Supply to In-line Switch Part Number: CPS-MxFSWIn stockPlug and Play in-line switch for CPS series power supplies and products. ON/OFF switch with 1 female and 1 or 2 male 5.5mm barrel connectors. 5 amps max at 12VDC. 31.75cm(12.5in) wire length. -
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
$6.99 ea.Single Color LED Controller with Dynamic Modes - CPS - Mini LED Dimmer Part Number: MLD-5A-CPSIn stockUniversal single color mini LED dimmer and dynamic mode controller can dim any 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). Includes controller mounted push buttons for mode, speed and brightness adjustment. Features 8 dynamic flashing modes with adjustable speeds and power cycle mode retention. Maximum load is 5 Amps. Features 3.5" CPS power plug for easy plug and play installation. Price for each.
-
$7.99 ea.LDP-2A 12-24 VDC Universal Single Color LED Dimmer Part Number: LDP-2A-xIn stockThis universal single-color LED dimmer can dim any 12-24 VDC LED products from 0 to 100% using Pulse Width Modulation (PWM) circuit knob control. It has male and female 5.5mm barrel power connectors for connecting in line with our CPS series power supplies. The maximum load is 2 amps. Available with black or white finish.
-
$3.99 ea.12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-DIn stockUse this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders. -
$0.85 ea.CPS series Male to Male Direct Barrel Connectors - Male to Male Part Number: CPS-M2MIn stockStandard 5.5mm male to male direct connector for CPS series Compact Power supplies or BPS Battery Power supply. Can be used to extend lengths of power wires. -
$1.99 ea.LuxBar Power Connectors - LuxBar LED Linear Light Bar Fixture Part Number: LBFA-PxIn stockThe power connector for LuxBar Linear Light Fixtures is an adapter for LBFA 3 pin to 5.5mm barrel plug, standard to AC power adapters. Use this cable to connect your lightbar and power supply while providing additional length to span the distance between the two. Available in lengths from 11.8 inches to 3.3 feet. -
$7.99 ea.iSensor Proximity Switch - Open-Close On-Off Switch - IR switch Part Number: PLS-3AIn stockUniversal Proximity Sensor automatically powers LED Lights on when the sensor is activated (not blocked or covered). When cabinet, closet, or cubbie door is closed on proximity sensor, LED lights turn off, when door opens up, lights turn on automatically. Connects 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. Proximity range is with in 6" from IR sensor. 3M double sided adhesive included -
View all
Connectors20 additional compatible accessories
Reviews
4.5 / 5 stars
14 reviews
4.5 / 5 stars
14 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*