5m Single Color LED Side Emitting Strip Light - 24V - IP20

5m Single Color LED Side Emitting Strip Light - 24V - IP20

Part Number
STN-BSx-E6A-05C5M-24V

Features

  • Side oriented LEDs for side view illumination
  • Adhesive backing for convenient surface mounting
  • Low energy consumption
  • Dimmable 0-100%
  • 24 VDC
  • UL Listed, Lifetime warranty
View more details
In Stock

$92.99 ea.

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Loading...

Overview

Available in single color options, STN series Side Emitting Strip Light can provide decorative accents for cabinets, interior pathways, architectural coves, and more. Highting in hard to reach places, beams emit sideways with out showing the strip. with flexible construction, 3M™ adhesive backing, this field cuttable LED tape light has the convenient versatility to enhance any indoor space.
Product Details:
  • Cuttable in 2” segments
  • Available in red, green, blue
  • 24 VDC
  • IP20 rated for indoor conditions
  • 50000 hours L70 lifespan
  • UL Listed
  • Lifetime warranty
UL Listed
UL Listed
Lifetime
Lifetime
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Entryways
  • LED Backlights
  • Stairways
  • Off Grid Lighting
  • Coves
  • Under-Cabinets
  • Bias Lighting
  • Display Cases
  • Trade Shows

Specifications

Ambient Operating Temperature -20~+45 °C (-4~+113 °F)
Certifications/Compliance UL Listed
Current Draw 1.5A (1500mA)
Current Draw per Foot 91mA
Dimmable Yes
Environmental Rating Non-weatherproof, Suitable for Dry Locations
Finish White
IP Rating IP20
LED Beam Angle 120°
LED Density 36 LEDs/ft
LED Type 3014 SMD
LEDs per Segment 6
Length 16.4ft (5m)
Max Run (Class 2) Up to 32.8ft (10m)
Minimum Cut Length 50mm (1.97in)
Operating Voltage 24 VDC
Power Consumption 36 Watts
Rated Life (L70) 50000 Hours
Strip Width 5mm (0.20in)
Wattage per Foot 2.2 W/ft (7.2 W/m)
Print Specifications
Swipe left to see additional specifications
Part NO Color Temperature
STN-BSBLU-E6A-05C5M-24V Blue
STN-BSGRE-E6A-05C5M-24V Green
STN-BSRED-E6A-05C5M-24V Red

Accessories & Power Supplies

  1. NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m

    $43.99 ea.
    NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m Part Number: 18026NA
    In stock
    Use the KLUS® NISA-KRA Aluminum Channel for lighting niches and suspended ceilings. Consisting of the TENIKRA mounting strip and ONISA extrusion, the NISA-KRA can be mounted horizontally or vertically with screws and houses a single LED strip up to 10mm wide. The step-shaped TENIKRA strip allows for drywall edge mounting and, once sealed, forms a thin finished edge. Available in 3.3 ft (1m) and 6.6 ft (2m) lengths with an optional clear or frosted lens.
  2. Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W

    $49.99 ea.
    Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-D
    In stock
    24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  3. C1919 Dimensional Drawing

    $14.99 ea.
    TAPO Aluminum Channel - Surface - For Strips Up To 10mm - 1m / 2m Part Number: C1919
    In stock
    KLUS® designed their TAPO Aluminum Channel as a simple, economical profile housing for LED strip lights up to 10mm wide for full cover illumination. Use the TAPO strip channel with the included T-Cover lens and end caps to make simple fixtures with various applications.
  4. Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W

    $19.99 ea.
    Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W Part Number: ARM-24V-S
    In stock
    24 Volt Standard LED Power Supplies from Armacost Lighting deliver energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.
  5. STEKO aluminum channel for step edges

    $37.99 ea.
    STEKO Aluminum Channel - Step - For Strips Up To 7mm - 1m / 2m Part Number: 18018ANODA
    In stock
    KLUS® designed their STEKO Aluminum Channel for installation on the edges of platforms, stages, and stair tread nosings for step edge protection with built-in safety lighting. The extrusion has a non-slip tread and houses an LED strip up to 7mm wide under a silicone cord.
  6. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  7. DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  8. Magnitude Dimmable LED Power Supply - 50-200W - 24 Volt DC

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only).
  9. Wall-Mounted AC Adapter - 24 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector.
  10. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC Part Number: SE-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  11. View all

    All Accessories

    1 additional compatible accessories

  1. SLVD-60W - LED Dimmer for Standard Wall Switch Box

    $22.99 ea.
    LED Switch and Dimmer for Standard Wall Switch Box - 60W Max Part Number: SLVDx-60W
    In stock
    LED switch and dimmer combo designed to fit in standard wall switch boxes. Universal single color LED dimmer that can dim any 12VDC or 24VDC LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 60W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white and almond housing. Optional wall trim plate also available
  2. View all

    Controllers

    50 additional compatible accessories

  1. Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W

    $49.99 ea.
    Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-D
    In stock
    24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  2. Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W

    $19.99 ea.
    Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W Part Number: ARM-24V-S
    In stock
    24 Volt Standard LED Power Supplies from Armacost Lighting deliver energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.
  3. DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  4. Magnitude Dimmable LED Power Supply - 50-200W - 24 Volt DC

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only).
  5. Wall-Mounted AC Adapter - 24 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector.
  6. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC Part Number: SE-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  7. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  8. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC Part Number: LPV-x-24
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  9. Dimmable LED Driver - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V

    Starting at $39.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V Part Number: CVPSD-xWP-24V-JB
    In stock
    DiodeDrive Constant Voltage LED Driver is a Class 2 power supply for indoor lighting systems with a max wattage of 25 or 60. with 2 entry point screw terminals, as well as 6 knockouts, wire access is easy and shielded in a durable, vented enclosure. Built-in features include a junction box, as well as short-circuit, overload, and over-temperature protection. Optional 6ft power cord has a 5-15 plug.
  10. Dimmable LED Power Supply - DiodeDrive® Series - 120W Enclosed Power Supply - 24V

    $99.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 120W Enclosed Power Supply - 24V Part Number: CVPSD-120WM-24V-JB-x
    In stock
    DiodeDrive Constant Voltage 120W LED Driver can effectively power strip lights, light bars, and more, up to 120-watts. This power supply has an integrated junction box, as well as short-circuit, overload, and over-temperature protection. It has 6 total knockouts, for easy powering access. Shielded in a durable, vented enclosure, the TRIAC dimmable device runs cool in both indoor and outdoor settings. Optional 6ft power cord has a 5-15 plug.
  11. Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 24V

    $129.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 24V Part Number: CVPSD-200WM-24V-JB-x
    In stock
    Effectively power tape lights, linear bars, and more with DiodeDrive Constant Voltage 200W LED Driver. Housed in a durable, vented enclosure, the black ETL power supply runs cool in both indoor and outdoor applications. Designed with a built in junction box, as well as short-circuit, overload, and over-temperature protection. with 7 knockouts and easy wiring access, this TRIAC dimmable device has compact utility for residential and commercial use. Optional 6ft power cord has a 5-15 plug.
  12. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V Part Number: CVPS-xWM-24V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  13. View all

    24V Power Supplies

    20 additional compatible accessories

  1. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  1. NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m

    $43.99 ea.
    NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m Part Number: 18026NA
    In stock
    Use the KLUS® NISA-KRA Aluminum Channel for lighting niches and suspended ceilings. Consisting of the TENIKRA mounting strip and ONISA extrusion, the NISA-KRA can be mounted horizontally or vertically with screws and houses a single LED strip up to 10mm wide. The step-shaped TENIKRA strip allows for drywall edge mounting and, once sealed, forms a thin finished edge. Available in 3.3 ft (1m) and 6.6 ft (2m) lengths with an optional clear or frosted lens.
  2. C1919 Dimensional Drawing

    $14.99 ea.
    TAPO Aluminum Channel - Surface - For Strips Up To 10mm - 1m / 2m Part Number: C1919
    In stock
    KLUS® designed their TAPO Aluminum Channel as a simple, economical profile housing for LED strip lights up to 10mm wide for full cover illumination. Use the TAPO strip channel with the included T-Cover lens and end caps to make simple fixtures with various applications.
  3. STEKO aluminum channel for step edges

    $37.99 ea.
    STEKO Aluminum Channel - Step - For Strips Up To 7mm - 1m / 2m Part Number: 18018ANODA
    In stock
    KLUS® designed their STEKO Aluminum Channel for installation on the edges of platforms, stages, and stair tread nosings for step edge protection with built-in safety lighting. The extrusion has a non-slip tread and houses an LED strip up to 7mm wide under a silicone cord.
  4. SILER LED strip channel - surface mount - 14mm - with frosted lens

    $17.99 ea.
    SILER Aluminum Channel - Surface - For Strips Up To 14mm - 1m / 2m Part Number: B9325ANODA
    In stock
    KLUS® designed the SILER aluminum channel as a professional exterior mounting solution for LED strips up to 14mm wide. The silver anodized extrusion can reach a waterproof rating for wet areas. Available in 1m and 2m lengths with an optional frosted lens.
  5. PDS-H LED Strip Channel

    $15.99 ea.
    PDS-H Aluminum Channel - Surface - For Strips Up To 14mm - 1m / 2m Part Number: B9204ANODA
    In stock
    KLUS® designed the PDS-H aluminum channel to create a visually appealing fixture when installed using the optional concealed mounting brackets. The silver anodized extrusion houses LED strips up to 14mm wide. Available in 1m and 2m lengths with an optional clear or frosted lens.
  6. GLAD-45 LED Strip Channel

    $24.99 ea.
    GLAD-45 Aluminum Channel - Corner - For Strips Up To 10mm - 1m / 2m Part Number: B7009ANODA
    In stock
    The KLUS® GLAD-45 aluminum channel is a professional corner mounting solution for LED strip lights up to 10.8mm wide. This anodized extruded aluminum accent channel fits 90-degree corners and is available with a clear lens or frosted lens for smooth, 45-degree angle lighting with no visible hot spots. Create a defined "line of light" illumination with specific lens and LED strip combinations. Radiused edges and a smooth bezel offer a refined, finished visible fixture.
  7. LIPOD aluminum LED strip channel profile with optional frosted lens and end caps

    $29.99 ea.
    LIPOD Aluminum Channel - Surface - For Strips Up To 21mm - 1m / 2m Part Number: B5554ANODA
    In stock
    The KLUS® LIPOD aluminum channel can house LED strip lights up to 21mm wide, providing a single line of diffused light. The anodized extruded aluminum is designed for installation in ceilings and drywall and can reach a waterproof rating for damp areas. Available in 1m and 2m lengths with an optional black or frosted lens.
  8. KRAV-810 LED Strip Channel - Edge Lit Acrylic / Glass Profile - 10mm

    $51.99 ea.
    KRAV-810 Aluminum Channel - Edge Lit - For Strips Up To 10mm - 1m / 2m Part Number: 18016ANODA
    In stock
    The non-structural KLUS® KRAV-810 aluminum channel extrusion provides a professional mounting solution for edge-lighting glass or Plexiglas panels with LED strips up to 10mm wide. Compatible with transparent or frosted panels 8-10mm thick, the silver anodized aluminum strip is installed using included self-adhesive tape and clasps. Not intended for construction or support.
  9. LINO Surface Mount Channel - KLUS® - 10mm

    $14.99 ea.
    LINO Aluminum Channel - Surface - For Strips Up To 7mm - 1m / 2m Part Number: B8287ANODA
    In stock
    Measuring only 10mm wide, the LINO aluminum channel system from KLUS® creates a narrow line of light for defined lighting with LED strips up to 7mm wide. The slim anodized aluminum profile fits in grooves for interior design, furniture, exhibitions, and architectural detail lighting. Able to reach a waterproof rating for outdoor use.
  10. KRAV-05IN LED Strip Channel - Edge Lit Acrylic / Glass Profile - 14mm

    $72.99 ea.
    KRAV-05IN Aluminum Channel - Edge Lit - For Strips Up To 14mm - 1m / 2m Part Number: 18045
    In stock
    The non-structural KLUS® KRAV-05IN aluminum channel extrusion provides a professional mounting solution for edge-lighting glass or Plexiglas panels with LED strips up to 14mm wide. Compatible with transparent or frosted panels 11.9-13.5mm thick, the silver anodized aluminum strip is installed using included self-adhesive tape and clasps. Not intended for construction or support.
  11. KRAV-56 LED Strip Channel - Edge Lit Acrylic / Glass Profile - 7mm

    $48.99 ea.
    KRAV-56 Aluminum Channel - Edge Lit - For Strips Up To 7mm - 1m / 2m Part Number: 18017
    In stock
    The non-structural KLUS® KRAV-56 aluminum channel extrusion provides a professional mounting solution for edge-lighting glass or Plexiglas panels with LED strips up to 7mm wide. Compatible with transparent or frosted panels 5-6mm thick, the silver anodized aluminum strip is installed using included self-adhesive tape and clasps.
  12. EX-ALU LED Strip Channel - Edge Lit Acrylic / Glass Profile - 11mm

    $88.99 ea.
    EX-ALU Aluminum Channel - Edge Lit - For Strips Up To 11mm - 1m / 2m Part Number: B1890ANODA
    In stock
    The KLUS® EX-ALU LED aluminum channel extrusion provides a professional mounting solution for edge-lighting 6mm glass or Plexiglas (acrylic) signs with sandblasting or laser-etched graphics and logos. The anodized profile holds LED strip lights up to 11mm wide. Available in 3.3ft (1m) or 6.6ft (2m) lengths.
  13. View all

    Channels

    14 additional compatible accessories

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: 5m Single Color LED Side Emitting Strip Light - 24V - IP20

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.