5-1/2" Amber LED Strobe Light Beacon - Single Flash Pattern - Amber 36
Part Number
STB-A36
Features
- 360° flashing illumination for safe alerting
- Weatherproof ABS mounting base
- Lifetime warranty
Overview
with a diameter of only 2.3,” the versatile STB-A36 Amber LED Strobe Light Beacon provides improved safety to warehouse equipment and vehicles. Featuring 360° illumination, the attention-grabbing strobe pattern flashes 80x per minute to provide superior visibility from any direction. Includes a polycarbonate lens and ABS mounting base that secures with a permanent screw mount. A 75” connects using a pigtail connector.
Product Details:
- ABS mounting base
- Polycarbonate lens
- 75” power wire
- Pigtail connector
- Permanent screw mount
- Installation hardware included
- Rated IP67 against wet conditions
- 12-80 VDC
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Golf Carts
- Warehouses
- Forklift Lighting
- Order Picker Lighting
- Beacon Light
Similar LED Strobe Light Beacons
| Color Options | Height | Diameter | IP Rating | Volts | Price | ||
|
Amber
|
2.5 in
|
5 in
|
IP66
|
12-80 VDC
|
$29.99
ea.
|
|
|
Amber
|
3.8 in
|
3.4 in
|
IP65
|
12-48 VDC
|
$34.99
ea.
|
|
|
Amber
|
5.25 in
|
5 in
|
IP65
|
12-48 VDC
|
$49.99
ea.
|
|
|
Amber
|
5.25 in
|
2.3 in
|
IP65
|
12-48 VDC
|
$36.99
ea.
|
|
|
Amber
|
4.7 in
|
4.0 in
|
IP66
|
12-30 VDC
|
$29.99
ea.
|
|
|
Amber
|
6.75 in
|
4.8 in
|
IP65
|
12-48 VDC
|
$54.99
ea.
|
|
|
Amber
|
5.5 in
|
5 in
|
IP65
|
12-24 VDC
|
$49.99
ea.
|
|
Specifications
| Current Draw | 0.12A (120mA) |
|---|---|
| IP Rating | IP65 |
| Mount Type | Permanent Screw Mount |
| Voltage | 12-80 VDC |
| Wire Length | 74.8in(190cm) |
.Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$0.99 ea.24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24xIn stockUse these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
Note: Use pliers to close connector after wires are inserted.
Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.39 ea.22-16 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2216In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-16 AWG Black/White wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
-
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$0.99 ea.24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24xIn stockUse these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
Note: Use pliers to close connector after wires are inserted.
Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.39 ea.22-16 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2216In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-16 AWG Black/White wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
Reviews
4 / 5 stars
2 reviews
4 / 5 stars
2 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*