Need help? Contact us.

Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
Back
Optronics GloLight LED Clearance or Side Marker Light - Submersible - 9 LEDs - 2-1/2" Round - Amber / Red

Optronics GloLight LED Clearance or Side Marker Light - Submersible - 9 LEDs - 2-1/2" Round - Amber / Red

Part Number
MCL157xBP

Features

  • Distinctive GloLight design
  • Sonically sealed, waterproof
  • Mounts with grommet (sold separately)
  • P2 Rated
  • Lifetime Warranty
View more details
In Stock

Starting at $11.99 ea.
Add to Wish List Compare
Share:
main product photo
2 photos
Frequently Bought Together
Optronics GloLight LED Clearance or Side Marker Light - Submersible - 9 LEDs - 2-1/2" Round - Red
Optronics GloLight LED Clearance or Side Marker Light - Submersible - 9 LEDs - 2-1/2" Round - Red
$16.99 ea.
+
Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back
Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back
$3.49 ea.
+
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
$2.99 ea.
Total Price: $23.47

Overview

The 2-1/2" round GloLight by Optronics features waterproof construction for side marker and clearance light applications. Use to upgrade amber or red incandescent lights easily. Constructed of a durable polycarbonate housing and lens. Connect using the PL-10 connection. Recessed mount with grommet (sold separately).
Product Details:
  • Durable polycarbonate housing and lens
  • IP67 waterproof rating
  • Mounts with grommet (sold separately)
  • 12 VDC
  • Lifetime Warranty
DOT
DOT
Lifetime
Lifetime
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Semi-Truck Lighting
  • Side Marker Lights
  • Freightliner Light
  • Flatbed Truck Lights
  • Trailer Lights
  • LED Clearance Lights
  • Peterbilt Truck Lights

Specifications

Ambient Operating Temperature -30~+50 °C (-22~+122 °F)
Brand Optronics
Certifications/Compliance DOT Compliant
Current Draw 0.1A (100mA)
DOT Standard FMVSS 108
Environmental Rating Waterproof
FMVSS Code P2
Input Connection Type PL-10
Input Voltage 12 VDC
IP Rating IP67
Mount Type Grommet
PC Rated No
Power Consumption 1.2 Watts
Product Materials Polycarbonate
Series GloLight
Warranty Lifetime
Print Specifications
Swipe left to see additional specifications
Part NO Color
MCL157ABP Amber
MCL157RBP Red

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Installation Supplies
Mounting
Wiring
Connectors
Grommets

Accessories Links

Accessory Category
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back
    $4.99 ea.
    Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back Part Number: A57GB
    In stock

    Recess mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  3. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  4. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  5. PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire
    $0.49 per Foot
    PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire - WP22-3 Part Number: WP22-3
    In stock
    This 3-conductor, 22-gauge power wire is designed for low-voltage CCT LED lighting strips. It is UL-Listed, PP-insulated, and CMR rated flame-retardant. 2.2 amps per channel. Price per foot.
  6. Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
    $2.99 ea.
    Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long Part Number: A46PB
    In stock

    To connect an LED clearance or side marker lights with a PL-10 connector to power, use the 2-wire pigtail connector. 6" straight pigtail wire leads with stripped end and eyelet ground wire.

  7. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  8. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  9. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  10. psb-x-hole-snap-bushing

    $0.08 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  11. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  12. Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back
    $3.49 ea.
    Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back Part Number: A55GB
    In stock

    Mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  2. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  3. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  4. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  5. psb-x-hole-snap-bushing

    $0.08 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  6. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  7. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  1. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  2. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire
    $0.49 per Foot
    PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire - WP22-3 Part Number: WP22-3
    In stock
    This 3-conductor, 22-gauge power wire is designed for low-voltage CCT LED lighting strips. It is UL-Listed, PP-insulated, and CMR rated flame-retardant. 2.2 amps per channel. Price per foot.
  1. Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
    $2.99 ea.
    Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long Part Number: A46PB
    In stock

    To connect an LED clearance or side marker lights with a PL-10 connector to power, use the 2-wire pigtail connector. 6" straight pigtail wire leads with stripped end and eyelet ground wire.

  1. Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back
    $4.99 ea.
    Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back Part Number: A57GB
    In stock

    Recess mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  2. Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back
    $3.49 ea.
    Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back Part Number: A55GB
    In stock

    Mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: Optronics GloLight LED Clearance or Side Marker Light - Submersible - 9 LEDs - 2-1/2" Round - Amber / Red

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs