Optronics GloLight Uni-Light Mini LED Clearance or Side Marker Light with Grommet - 3/4" Round - Amber / Red

Optronics GloLight Uni-Light Mini LED Clearance or Side Marker Light with Grommet - 3/4" Round - Amber / Red

Part Number
MCL111xKBP

Features

  • GloLight technology supplies smooth light output with no hot spots
  • Sealed, waterproof design
  • Hard wired with included ground wire
  • PC Rated
  • Lifetime Warranty
View more details
In Stock

Starting at $6.99 ea.

Overview

The 3/4" round GloLight Uni-Light by Optronics features waterproof construction for side marker and clearance light applications. Use to upgrade amber or red incandescent lights easily. Constructed of a durable polycarbonate housing and lens. Hardwired connection with a separate ground wire. PC rated.
Product Details:
  • Durable polycarbonate housing and lens
  • IP67 waterproof rating
  • 12 VDC
  • Lifetime Warranty
DOT
DOT
Lifetime
Lifetime
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Semi-Truck Lighting
  • Side Marker Lights
  • Freightliner Light
  • Flatbed Truck Lights
  • Trailer Lights
  • LED Clearance Lights
  • Peterbilt Truck Lights

Specifications

Ambient Operating Temperature -30~+50 °C (-22~+122 °F)
Brand Optronics
Certifications/Compliance DOT Compliant
Current Draw 0.04A (40mA)
DOT Standard FMVSS 108
Environmental Rating Waterproof
FMVSS Code P2
Input Connection Type Pigtail
Input Voltage 12 VDC
IP Rating IP67
Mount Type Grommet
Power Consumption 0.5 Watts
Product Materials Polycarbonate
Series GloLight
Warranty Lifetime
Wire Gauge 18 AWG
Print Specifications
Swipe left to see additional specifications
Part NO Color
MCL111AKBP Amber
MCL111RKBP Red

Accessories & Power Supplies

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  3. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  4. psb-x-hole-snap-bushing

    $0.08 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  5. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  3. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  4. psb-x-hole-snap-bushing

    $0.08 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  1. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: Optronics GloLight Uni-Light Mini LED Clearance or Side Marker Light with Grommet - 3/4" Round - Amber / Red

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs