Low Profile LED Interior Dome Light with Switch - Rectangle - Cool White
Part Number
TDLS-W60
Customers Also Viewed
Overview
Add convenient lighting to enclosed trailers, workbenches, and under cabinets with the TDLS series rectangular LED Dome and Door Light fixture. Control with the built-in switch or install with optional dimmer to adjust for the perfect amount of illumination. Designed with a diffuser lens that evenly spreads the 250 lumens of cool white light. The low-profile design is ideal for mounting anywhere space is at a premium such as under cabinets or inside trailers. Surface mounts by removing the lens to access the mounting holes and using the attached 8” power wires. Two mounting screws are included.
Product Details:
- Includes 16” pigtail connection
- Mounting screws included
- 12 VDC
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Workbench
- RV Interiors
- Trunk
- Enclosed Trailers
- Food Trucks
- Off Grid Lighting
- Trucks
- Cargo Lighting
- Under-Cabinets
- Trailer Lights
- RV Lights
- Campers
- Boat Cabins
Specifications
| Current Draw | 470 mA |
|---|---|
| IP Rating | IP20 |
| Mount Type | Surface |
| Standards And Certifications | CE |
| Voltage | 12 VDC |
| Wire Length | 8 in (20.3 cm) |
| PC Rated | No |
.
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$12.99 ea.Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6AIn stockThis Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is within 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates within a 12-24 VDC range. Price for each.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$2.99 ea.Waterproof Mini Automotive Fuse Holder - Waterproof Part Number: WMFHIn stockFuse Holder with Waterproof Cap and pigtail wires. Takes blade-mounting Mini fuses sold separately above- 12 Gauge 4" wire leads. Price for each. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.99 ea.Mini ON/OFF Toggle Switch - Wired - Mini ON/OFF Toggle Switch - Wired Part Number: WRTS-SP-WIn stockON/OFF Single throw (SPST) Toggle Switch. Two 1/10in WIRED Male solder lug Contact Terminals 10A @ 12VDC. Mounting stem is 1/4in diameter and fits panels up to 1/8in thick. -
$0.25 ea.Automotive Mini Blade Fuses Part Number: MAF-xIn stockMiniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available. -
$2.49 ea.LED Indicator SPST Round Rocker Switch Part Number: RRS-SPxIn stockON/OFF Round Rocker Switch with LED indicator, three 3/16" male contact terminals with #6 screw contacts. Use SCFP-2218 3/16" female push-on connector. 15 Amp max at 12VDC. Mounting hole 13/16" in diameter and fits panels up to 1/8" thick.
-
$0.15 ea.Hole Snap-In Strain Relief Bushing Part Number: PSB-xIn stockEliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull. -
View all
All Accessories19 additional compatible accessories
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$2.99 ea.Waterproof Mini Automotive Fuse Holder - Waterproof Part Number: WMFHIn stockFuse Holder with Waterproof Cap and pigtail wires. Takes blade-mounting Mini fuses sold separately above- 12 Gauge 4" wire leads. Price for each.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.25 ea.Automotive Mini Blade Fuses Part Number: MAF-xIn stockMiniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available. -
$0.15 ea.Hole Snap-In Strain Relief Bushing Part Number: PSB-xIn stockEliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull. -
$0.99 ea.24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24xIn stockUse these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
Note: Use pliers to close connector after wires are inserted.
Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector. -
$0.09 ea.22-18 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 22-18 AWG Part Number: BFN-2218In stockUse this female bullet connector to quickly connect and disconnect 22-18 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 22-18 AWG and 16-14 AWG male bullet connectors. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
View all
Installation Supplies15 additional compatible accessories
-
$0.99 ea.Mini ON/OFF Toggle Switch - Wired - Mini ON/OFF Toggle Switch - Wired Part Number: WRTS-SP-WIn stockON/OFF Single throw (SPST) Toggle Switch. Two 1/10in WIRED Male solder lug Contact Terminals 10A @ 12VDC. Mounting stem is 1/4in diameter and fits panels up to 1/8in thick.
-
$2.49 ea.LED Indicator SPST Round Rocker Switch Part Number: RRS-SPxIn stockON/OFF Round Rocker Switch with LED indicator, three 3/16" male contact terminals with #6 screw contacts. Use SCFP-2218 3/16" female push-on connector. 15 Amp max at 12VDC. Mounting hole 13/16" in diameter and fits panels up to 1/8" thick.
-
$12.99 ea.Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6AIn stock
This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is within 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates within a 12-24 VDC range. Price for each.
-
$7.99 ea.PIR Motion Sensor Switch - 12-24 VDC - 8 Amps - PIR switch Part Number: LPIR-8AIn stockThis PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights for 10 seconds when human motion is detected. Designed to save energy and prolong the life of your LED lights. Motion detection range is with in 15' of the PIR sensor. The single-channel sensor has an 8-Amp maximum load and operates with in a 12-24 VDC range. Price for each.
Reviews
5 / 5 stars
7 reviews
5 / 5 stars
7 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*