Diode Dynamics Stage Series SSC1 Sport Yellow LED Pod Lights - 1,305 Lumens - Wide Beam - Qty 2
Features
- Ultra-compact, single-LED form factor
- High-intensity 10-watt LED chip
- Backlighting in a brilliant amber color
- Pin-fin heatsink design, for superior thermal dissipation
- Integrated Deutsch-style connector
- Designed, stress-tested and assembled in USA
What's In The Box:
- 2- Stage Series C1 LED Pods
- 2- Deutsch-style wire pigtails
- 2- Mounting brackets and hardware
Overview
Introducing the Stage Series C1 LED Pod! Featuring custom-engineered TIR optics combined with a single high-power LED chip, these pods have been designed for maximum performance and light output- each set producing 2,610 Lumens (1,305 lumens per light)- in our most compact, versatile package yet. The SSC1 can be mounted virtually anywhere on your car, truck, motorcycle, or UTV, including spots where larger LED pods won't fit. Traditional optics like reflectors or simple lenses lose light internally and glare, so not all of the light shines on the target. Instead, the custom-engineered TIR optic in the Stage Series C1 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency.
The Wide pattern is perfect for general illumination, delivering a 50-degree horizontal beam spread with a tighter 20-degree vertical spread. The Wide pattern can be used anywhere you need to shine some extra light!
Stage Series LED pods are available at two different power levels. Both options use high-intensity LED emitters and TIR optics for unmatched focus and overall output. However, the Pro option is double the amount of total power.
Note: DD4092 wiring harness is required for amber backlit function
SSC1 Sport Yellow Standard Datasheet 
Specifications
| Ambient Operating Temperature | -40~+85 °C (-40~+185 °F) |
|---|---|
| BackLit Color | Amber |
|
Beam Angle
Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
50° x 20° |
|
Beam Pattern
Beam Pattern
Spot Lights
Spot lights give off a narrow and concentrated beam of light that allows for greater visibility at further distances. With light output stretching beyond that of standard headlights. Spot lights are best used to navigate dark back roads for everything from recreational vehicles to work trucks and search and rescue vehicles. Flood Lights Flood lights are best at illuminating a wider area at a shorter distance than typical headlights. These are great for use on vehicles performing tasks at night such as roadwork or harvesting, as well as use on curvy roads and side roads. Combo Beams
Combo vehicle lights are a combination of a spot light and a flood light that are always on simultaneously. This allows for the light to cover both short and long distances at the same time for a variety of tasks. Selectable Multibeams
Selectable multibeams contain both a spot light and a flood light. With this, you gain the ability to have either the spot light or the flood light, or both on at the same time. Selectable multi-beams are extremely versatile in that you get three beam patterns in a single light. However it does require additional wiring to operate both beams independently through either multiple rocker switches, or a momentary switch. Combo + Side Shooters
Side shooters illuminate a full 180 degrees or more through the use of a combo beam vehicle light. Side shooters contain an extra row of vertically or horizontally stacked and angled LED lights. This row is what gives the side shooter the ability to expand beyond a normal flood light's field of view. Side shooters are best used while stationary or at very low speeds where the field of view is critical. |
Wide |
| Brand | Diode Dynamics |
| Certifications/Compliance | SAE J575 |
|
Current Draw
Current Draw
The current draw of your lights is calculated using the amount of power your light needs (wattage) and system voltage using the following formula: Watts/Volts = amps or W/V = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED bulbs with the correct amperage ensures proper operation and prevents damage to your electrical system or the bulbs. See your vehicle owner's manual for amperage, wattage, and voltage information, or match the information on your existing bulbs. |
1 A @ 12.8 VDC, 24 mA @ 12.8 VDC |
|
Environmental Rating
Environmental Rating
|
Waterproof |
| Finish | Black |
| Input Connection Type | DT Connector, Pigtail |
| Input Voltage | 9-16 VDC |
|
IP Rating
IP Rating
|
IP67 |
| LED Color | Yellow |
| Length | 2 in. |
| Lens Color | Yellow |
| Lumens | 1305 Lumens |
| Polarity Sensitive | Yes |
| Product Materials | Steel Brackets, Aluminum Housing, Polycarbonate Lens |
| Series | Stage Series |
| Warranty | 8 Year |
| Wattage | 0.3 Watts, 12.8 Watts |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
