What Is Accent LED Module Lighting?
Accent LED module lights are used to highlight areas in a vehicle’s interior and exterior. These lights are typically smaller, with various shape options available, including oval, rectangular, round, or tube. Lights installed outside a vehicle should have at least an IP65 rating for full intrusion protection and water resistance, but an IP67 submersible waterproof rating may be more suitable for harsher weather conditions or terrains.
Application Areas
Module lights are adaptable to be used in a wide range of applications, both in the interior and exterior of the vehicle.
-
Engine Bays
-
Wheel Wells
-
Fender
-
Saddlebag Lights
-
Truck Bed
-
Trunks
-
Door Entryways
-
Footwells
How to Install Rock Lights
The installation of rock lights is fairly straightforward. Our rock lights are surface-mounted, with the necessary mounting hardware included. Disconnect the negative battery terminal, use the rock light to determine where you want to drill the screws, and mount. Route the wiring from your vehicle to the rock light. We offer a plug-and-play wiring harness to simplify this step.
Is it Legal to Install Light Modules on My Motorcycle?
The legality of installing LED light modules on your motorcycle will vary by state. Many states have legislation in place for the colors and placement of the lights, as well as limiting the use of strobing, or flashing lights, or under-glow lighting on public roads. For example, red or blue LEDs are usually only permitted for emergency vehicles. You should always check with your local government’s legislation before installation.
What Colors Are Available for LED Accent Light Modules?
There are various color options available for our accent LED modules. Exact color availability will depend on the specific fixture.
-
Amber
-
Blue
-
Green
-
Pink
-
Red
-
Warm White
-
Natural White
-
Cool White
-
RGB
-
RGBW
What Should I Consider When Shopping for LED Modules?
When choosing the right LED module for your vehicle, there are various factors you can consider. One is the product type you want to install. Options will vary depending on whether you’re lighting the interior or exterior of your vehicle. For example, the footwell lights and tube lights are typically used for lighting car door entries, footwells, trunks, and other areas along the interior of a vehicle. However, rock lights or rectangular accent lights can accentuate wheel wells, engine bays, and other areas along a vehicle’s exterior.
Another factor is the color that best fits your application. We offer both RGB and white colors. If you need different colors, want the freedom to change colors, or dynamic modes, we recommend using one of our color-changing lights. Lastly, choose a fixture that is compatible with the voltage constraints of your vehicle. Our products come in voltage options of 5 VDC, 12 VDC, 24 VDC, 28 VDC, etc.
Can I Control My Accent LED Module With A Phone or Remote?
Yes, we carry module lights that are compatible with a smart app or an RF remote.
Installing these lights increases the convenience and controllability of your application. With these lights, you can switch between color options, power lights on and off, connect to music, select lighting modes, and more.
