11" Mini Emergency LED Strobe Light Bar with Magnetic Base - 12V Plug - 26 Functions - Clear Lens
Features
- Select from 26 strobe patterns
- 12V Aux Plug with backlit switch
- Memory function recalls last used pattern
- SAE J845 Class 1 certified
- CISPR Class 3 certified - prevents RFI/EMI interference
- Lifetime waranty
Try asking:
Overview
Magnetic mounts are only intended for low speeds. A permanent mounting option is available for use at highway speeds.
Product Details:
- ABS housing and polycarbonate lens
- IP67 waterproof rating
- Magnetic surface mount
- 9.5 ft (2.9 m) power cord length
- 12 VDC
- SAE J845 Class 1
- Lifetime Warranty
- Construction Equipment
- Emergency Vehicles
- Public Safety Vehicles
- Roadside Assistance Vehicles
- Warning Lights
RFI EMI Protected
EMI/RFI shielding uses materials like copper or aluminum to protect electronics from electromagnetic interference (EMI) and radio frequency interference (RFI), which are sometimes combined under the heading of electromagnetic compatibility (EMC). This process ensures reliable operation and maintains signal integrity across various applications. Shielding is essential for electronic devices in multiple fields, including healthcare, military, telecommunications applications, and consumer electronics.
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Try asking:
Specifications
| Ambient Operating Temperature | -30 to 60 °C (-22 to 140 °F) |
|---|---|
|
Beam Angle
Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
360° |
| Brand | Super Bright LEDs |
| Certifications/Compliance | CE, CISPR Class 3 , SAE Class 1 |
|
Current Draw
Current Draw
The current draw of your lights is calculated using the amount of power your light needs (wattage) and system voltage using the following formula: Watts/Volts = amps or W/V = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED bulbs with the correct amperage ensures proper operation and prevents damage to your electrical system or the bulbs. See your vehicle owner's manual for amperage, wattage, and voltage information, or match the information on your existing bulbs. |
4.5 A @ 12 VDC |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Waterproof |
| Finish | Black |
| Input Connection Type | 12V Accessory Plug |
| Input Voltage | 12 VDC |
|
IP Rating
IP Rating
![]() |
IP67 |
| Length | 11 in. (0.92 ft) |
| Lens Color | Clear |
| Mount Type | Magnetic Mount |
| Product Materials | ABS Housing, Polycarbonate Lens |
| Warranty | Lifetime |
| Wattage | 54 Watts |
| Wire Length | 114 in. (9.5 ft) |
| Part NO | LED Color | LED Quantity |
|---|---|---|
| STMB-A54W-C | Amber | 60 |
| STMB-AW54W-C | Amber / White | 120 |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed

