Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
Optronics GloLight LED Trailer Tail Light - Stop / Tail / Turn - Submersible - 22 LEDs - Oval - Clear Lens

Optronics GloLight LED Trailer Tail Light - Stop / Tail / Turn - Submersible - 22 LEDs - Oval - Clear Lens

Part Number
STL111RCBP

Features

  • Distinctive GloLight design creates a solid panel of light
  • Sonically sealed, waterproof
  • Mount in any 360 degree position
  • Mounts with grommet (sold separately)
  • Lifetime Warranty
View more details
In Stock

Starting at $18.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
8 photos
Frequently Bought Together
Optronics GloLight LED Trailer Tail Light - Stop / Tail / Turn - Submersible - 22 LEDs - Oval - Clear Lens
Optronics GloLight LED Trailer Tail Light - Stop / Tail / Turn - Submersible - 22 LEDs - Oval - Clear Lens
$18.99 ea.
+
Grommet for 6" Oval Trailer Tail Lights
Grommet for 6" Oval Trailer Tail Lights
$4.49 ea.
+
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long
$4.49 ea.
Total Price: $27.97
Loading...

Overview

The 6" oval GloLight LED trailer tail light by Optronics features waterproof construction for stop light, turn signal, and tail light applications. The light is constructed with durable polycarbonate and has an IP67 waterproof rating. Connect using the PL-3 connection. Recessed mount with grommet (sold separately).
Product Details:
  • Durable polycarbonate housing and lens
  • IP67 waterproof rating
  • Mounts with grommet (sold separately)
  • 12 VDC
  • Lifetime Warranty
DOT
DOT
Lifetime
Lifetime
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Semi-Truck Lighting
  • Turn Lights
  • Brake Lights
  • Emergency Vehicle Lighting
  • RV Lights
  • Boat Trailer Tail Lights
  • Trailer Tail Lights

Specifications

Ambient Operating Temperature -30~+50 °C (-22~+122 °F)
Brand Optronics
Certifications/Compliance DOT Compliant
Color Red
Current Draw 0.59A (590mA), 0.3A (300mA)
Diameter 6 in
DOT Standard FMVSS 108
Environmental Rating Waterproof
FMVSS Code I6, S2, T2
Input Connection Type PL-3
Input Voltage 12 VDC
IP Rating IP67
Mount Type Grommet
PC Rated No
Power Consumption 7.1 Watts
Product Materials Polycarbonate
Series GloLight
Warranty Lifetime
Print Specifications

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Installation Supplies
Mounting
Wiring
Connectors
Grommets

Accessories Links

Accessory Category
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire
    $0.49 per Foot
    PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire - WP22-3 Part Number: WP22-3
    In stock
    This 3-conductor, 22-gauge power wire is designed for low-voltage CCT LED lighting strips. It is UL-Listed, PP-insulated, and CMR rated flame-retardant. 2.2 amps per channel. Price per foot.
  3. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  4. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  5. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  6. Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long
    $4.49 ea.
    Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A47PB
    In stock

    To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" right angle pigtail wire leads with stripped ends.

  7. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  8. Grommet for 6" Oval Trailer Tail Lights
    $4.49 ea.
    Grommet for 6" Oval Trailer Tail Lights Part Number: A70GB
    In stock

    Mount a 6" oval trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  9. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  10. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  11. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  12. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  3. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  4. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  5. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  6. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  7. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  1. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  2. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire
    $0.49 per Foot
    PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire - WP22-3 Part Number: WP22-3
    In stock
    This 3-conductor, 22-gauge power wire is designed for low-voltage CCT LED lighting strips. It is UL-Listed, PP-insulated, and CMR rated flame-retardant. 2.2 amps per channel. Price per foot.
  1. Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long
    $4.49 ea.
    Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A47PB
    In stock

    To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" right angle pigtail wire leads with stripped ends.

  2. 3-Wire Pigtail for Optronics Trailer Lights - Weathertight Plug - 10" Long
    $2.99 ea.
    3-Wire Pigtail for Optronics Trailer Lights - Weathertight Plug - 10" Long Part Number: A45PMB
    In stock

    To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire weatherproof pigtail connector. 10" straight pigtail wire leads with stripped ends.

  1. Grommet for 6" Oval Trailer Tail Lights
    $4.49 ea.
    Grommet for 6" Oval Trailer Tail Lights Part Number: A70GB
    In stock

    Mount a 6" oval trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: Optronics GloLight LED Trailer Tail Light - Stop / Tail / Turn - Submersible - 22 LEDs - Oval - Clear Lens

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.