Square LED Panel Light - Vehicle and Trailer 12V LED Task Light - 6in x 6in - 412 Lumens - Flush Mount
Part Number
VTL-x1515
Customers Also Viewed
Overview
Description
Small, low-profile square dome light fixture that brings big LED light for vehicle task lights, cargo lights, and big rig trucks. This versatile 6 inch flush panel also works as light boxes and sign back-lighting, under cabinets, for desk illumination, and with low voltage and off-grid applications. Available in cool white and natural white.
Product Details:
- Includes 8” pigtail connector
- Mounting hardware included
- 12-24 VDC
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Workbench
- RV Interiors
- Trunk
- Vehicle Task Lights
- Toy Haulers
- Enclosed Trailers
- Food Trucks
- Off Grid Lighting
- Cargo Lighting
- Under-Cabinets
- Boat Cabins
Specifications
| Current Draw | 550 mA |
|---|---|
| IP Rating | IP20 |
| Mount Type | Surface |
| Standards And Certifications | CE |
| Voltage | 12-24 VDC |
| Wire Length | 8in(20.3cm) |
| PC Rated | No |
.
Swipe left to see additional specifications
| Part NO | Dimensions |
|---|---|
| VTL-CW1515 | 6in x 6in |
| VTL-NW1515 |
Accessories & Power Supplies
Accessories Links
Accessory Category-
$34.99 ea.0-10 Volt DC Low Voltage Dimmer with Rotary Dimmer Switch - 0-10V Dimmer Part Number: A019In stockThis 0-10 volt DC low-voltage dimmer is designed for high-power LEDs, 3021/3023 BuckPuck LED drivers, and other compatible drivers or light engines with a 0-10V current-sinking control. Features logarithmic response and reverse polarity protection. Product comes complete with knob, wall trim plate, mounting screws, and wire nuts. -
$0.09 ea.22-18 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 22-18 AWG Part Number: BFN-2218In stockUse this female bullet connector to quickly connect and disconnect 22-18 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 22-18 AWG and 16-14 AWG male bullet connectors. -
$0.09 ea.22-18 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 22-18 AWG Part Number: BMN-2218In stockUse this male bullet connector to quickly connect and disconnect 22-18 AWG wire. The insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 22-18 AWG and 16-14 AWG female bullet connectors. -
$32.99 ea.12-24V LED Dual Slide Switch and Dimmer for Standard Wall Switch Box - 120W Max Part Number: DLVDW-120WIn stockLED dual slide switch and dimmer combo designed to fit in standard wall switch boxes. Universal LED dimmer that can dim any 12VDC or 24VDC Dual Color or Variable Color Temperature LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 120W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white housing. Optional wall trim plate also available.
-
$29.99 ea.Wireless Single Color LED Dimmer Switch for EZ Dimmer Controller - EZD-1C-WM Part Number: EZD-1C-WMIn stockDesigned for use with the Wireless LED 1-Channel EZ Dimmer Receiver or Wireless LED 4 Channel EZ Dimmer Receiver with Channel Pairing, this single-color wireless LED dimmer switch fits in standard wall switch boxes and provides on/off control as well as fixed levels of dimmability. The dimmer knob transmits an RF signal to the wireless receiver from up to 300' away in open air. The wall-mounted wireless dimmer includes 2 mounting screws and a required 3V CR2032 battery installed. -
$29.99 ea.Wireless LED 1 Channel EZ Dimmer Controller - EZD-1C8A Part Number: EZD-1C8AIn stockDesigned for use within the EZ Dimmer series, this wireless 1-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 8 amps and has spring terminal connectors for in and out power connections.
-
$27.99 ea.0-10 Volt DC Low Voltage Dimmer with Slide Dimmer Switch - 0-10V Dimmer Part Number: F019-WIn stockThis 0-10 volt DC low-voltage dimmer is designed for high-power LEDs, 3021/3023 BuckPuck™ LED drivers, and other compatible drivers or light engines with a 0-10V current-sinking control. Features logarithmic response and reverse polarity protection. Product comes complete with slider switch, wall trim plate, mounting screws, and wire nuts. -
$12.99 ea.LBFA-DT LuxBar Mini Touch Dimmer - Touch Dimmer Part Number: LBFA-DTIn stockLBFA series touch dimmer for LBFA linear light fixtures. Dimmer can be placed anywhere on the series and must be used with included 24 VDC power supply. Includes the power connector (LBFA-PDT), two direct interconnect jumpers (LBFA-I), 1 flat type mounting clip (LBFA-MC1), and user manual. -
$12.99 / setSingle Color LED Dimmer - Wireless RF Remote - 8 Amps - LED Dimmer with RF Remote Part Number: LDBRF-8AIn stockThis LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED dimmer and remote have brightness arrow buttons to dim light strips from 0%-100% using Pulse Width Modulation (PWM). Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 8 amps and is compatible with LED light strips that operate with in a 12-24V DC range. Spring terminal connectors on the dimmer allow for power in and out connections and are polarity sensitive (red is positive, and black is negative). Includes remote battery. -
$9.99 ea.LDK-8A 12~24 Volt DC Single Color LED Dimmer - Single Color LED Dimmer Part Number: LDK-8AIn stockOur LDK-8A is a universal single-color LED dimmer switch that can dim most 12V DC or 24V DC LED products from 0%-100% using a Pulse Width Modulation (PWM) circuit knob control. The plastic housing has screw terminals for power in and out connections with a maximum load of 8 Amps.
-
$12.99 ea.Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6AIn stockThis Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is within 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates within a 12-24 VDC range. Price for each.
-
$7.99 ea.PIR Motion Sensor Switch - 12-24 VDC - 8 Amps - PIR switch Part Number: LPIR-8AIn stockThis PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights for 10 seconds when human motion is detected. Designed to save energy and prolong the life of your LED lights. Motion detection range is with in 15' of the PIR sensor. The single-channel sensor has an 8-Amp maximum load and operates with in a 12-24 VDC range. Price for each. -
View all
All Accessories56 additional compatible accessories
-
$34.99 ea.0-10 Volt DC Low Voltage Dimmer with Rotary Dimmer Switch - 0-10V Dimmer Part Number: A019In stockThis 0-10 volt DC low-voltage dimmer is designed for high-power LEDs, 3021/3023 BuckPuck LED drivers, and other compatible drivers or light engines with a 0-10V current-sinking control. Features logarithmic response and reverse polarity protection. Product comes complete with knob, wall trim plate, mounting screws, and wire nuts.
-
$32.99 ea.12-24V LED Dual Slide Switch and Dimmer for Standard Wall Switch Box - 120W Max Part Number: DLVDW-120WIn stock
LED dual slide switch and dimmer combo designed to fit in standard wall switch boxes. Universal LED dimmer that can dim any 12VDC or 24VDC Dual Color or Variable Color Temperature LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 120W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white housing. Optional wall trim plate also available.
-
$29.99 ea.Wireless Single Color LED Dimmer Switch for EZ Dimmer Controller - EZD-1C-WM Part Number: EZD-1C-WMIn stockDesigned for use with the Wireless LED 1-Channel EZ Dimmer Receiver or Wireless LED 4 Channel EZ Dimmer Receiver with Channel Pairing, this single-color wireless LED dimmer switch fits in standard wall switch boxes and provides on/off control as well as fixed levels of dimmability. The dimmer knob transmits an RF signal to the wireless receiver from up to 300' away in open air. The wall-mounted wireless dimmer includes 2 mounting screws and a required 3V CR2032 battery installed.
-
$29.99 ea.Wireless LED 1 Channel EZ Dimmer Controller - EZD-1C8A Part Number: EZD-1C8AIn stock
Designed for use within the EZ Dimmer series, this wireless 1-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 8 amps and has spring terminal connectors for in and out power connections.
-
$27.99 ea.0-10 Volt DC Low Voltage Dimmer with Slide Dimmer Switch - 0-10V Dimmer Part Number: F019-WIn stockThis 0-10 volt DC low-voltage dimmer is designed for high-power LEDs, 3021/3023 BuckPuck™ LED drivers, and other compatible drivers or light engines with a 0-10V current-sinking control. Features logarithmic response and reverse polarity protection. Product comes complete with slider switch, wall trim plate, mounting screws, and wire nuts.
-
$12.99 ea.LBFA-DT LuxBar Mini Touch Dimmer - Touch Dimmer Part Number: LBFA-DTIn stockLBFA series touch dimmer for LBFA linear light fixtures. Dimmer can be placed anywhere on the series and must be used with included 24 VDC power supply. Includes the power connector (LBFA-PDT), two direct interconnect jumpers (LBFA-I), 1 flat type mounting clip (LBFA-MC1), and user manual.
-
$12.99 / setSingle Color LED Dimmer - Wireless RF Remote - 8 Amps - LED Dimmer with RF Remote Part Number: LDBRF-8AIn stockThis LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED dimmer and remote have brightness arrow buttons to dim light strips from 0%-100% using Pulse Width Modulation (PWM). Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 8 amps and is compatible with LED light strips that operate with in a 12-24V DC range. Spring terminal connectors on the dimmer allow for power in and out connections and are polarity sensitive (red is positive, and black is negative). Includes remote battery.
-
$9.99 ea.LDK-8A 12~24 Volt DC Single Color LED Dimmer - Single Color LED Dimmer Part Number: LDK-8AIn stock
Our LDK-8A is a universal single-color LED dimmer switch that can dim most 12V DC or 24V DC LED products from 0%-100% using a Pulse Width Modulation (PWM) circuit knob control. The plastic housing has screw terminals for power in and out connections with a maximum load of 8 Amps.
-
$9.99 / setSingle Color LED Controller with Dynamic Modes - RF Remote - Mini Single Color LED Controller Part Number: MCBRF-4AIn stockUniversal single color mini LED dimmer with RF remote can dim most 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). 8 dynamic modes with adjustable speed control. Features power cycle mode retention. Maximum load is 4 amps. Attached 4" power input and controller output wire leads. 1 Remote to 1 controller pairing. Range greater than 30ft in open air. Battery for RF remote included. -
$6.99 ea.Single Color LED Controller with Dynamic Modes - Mini LED Dimmer Part Number: MLD-5AIn stockUniversal single color mini LED dimmer can dim any 5~24V DC LED product from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps - holding Speed/Bright button turns LEDs ON/OFF. Retains last setting when power is cycled. Attached 4" power input and controller output wire leads. Suitable for vehicles -
$44.99 ea.0-10V LED Switch and Slide LED Dimmer - Single Pole/3-Way Part Number: DMD-LED3-105-xIn stockUse this 0-10V LED switch and slide dimmer on LED fixtures, such as panels and high-bay lights, with 0-10V dimming capabilities. It has a paddle for on/off functionality and a small slider for dimming. Use the 3-way switch to control lights from two locations. Integrated high- and low-end trim adjustment dials allow access to the lowest and highest light levels without flickering. The dimmer is rated for six amps at 120 VAC or three amps at 277 VAC (amps = fixture wattage/voltage). -
$7.99 ea.LDP-2A 12-24 VDC Universal Single Color LED Dimmer Part Number: LDP-2A-xIn stockThis universal single-color LED dimmer can dim any 12-24 VDC LED products from 0 to 100% using Pulse Width Modulation (PWM) circuit knob control. It has male and female 5.5mm barrel power connectors for connecting in line with our CPS series power supplies. The maximum load is 2 amps. Available with black or white finish.
-
View all
Dimmers21 additional compatible accessories
-
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockThe Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it has a constant current limiting circuit, full load burn-in, and fixed switching frequency. It can withstand a universal AC input range of 100-240VAC, and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.
-
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$49.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12VIn stockClass 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to withstand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, without energy waste or risk of circuit overload.
-
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will withstand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside without energy waste or risk of circuit overload.
-
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
-
$129.99 ea.Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 12V Part Number: CVPSD-200WM-12V-JB-xIn stockDiodeDrive Constant Voltage 200W LED Driver can effectively power lights that require low voltage, such as strip lights and linear light bars. With a max wattage of 100 per outlet, this TRIAC dimmable device protects against short-circuit, overload, and heat build up. The durable, vented enclosure protects the inner components for indoor or outdoor use. Designed with 2 outputs and 7 total knockouts, wire access is easy. Select to include the optional power cord for simplified installation.
-
$39.99 ea.Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC Part Number: CVPSD-xWP-12V-JBIn stockThis enclosed dimmable LED driver/power supply is class-2 rated and has a maximum load of 25 or 60 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$114.99 ea.Magnitude Dimmable LED Driver - Compact - 12 Volt Part Number: ExL12DCIn stockThe compact Magnitude dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 60 watts. The 12-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Includes 2 knock-outs for easy wire access as well as auto reset, over-current, and short circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
-
$109.99 ea.Magnitude Dimmable LED Driver - Super Compact - 12 Volt Part Number: ExR12DCIn stockThe Magnitude super-compact dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 60 watts. The 12-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Features auto reset, over-current, and short circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
-
$13.99 ea.Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1JIn stockUse the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and overvoltage and has a 5.5mm barrel connector output and standard 1-15P 120VAC input. Available in 18 or 25-watt maximum output.
-
$99.99 ea.Dimmable LED Driver - Enclosed Power Supply - 120W - 12 Volt DC Part Number: KVP-12120-TDLIn stockThis enclosed dimmable LED driver/power supply has a maximum load of 120 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The sealed driver allows for indoor or outdoor use. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
View all
12V Power Supplies17 additional compatible accessories
-
$0.09 ea.22-18 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 22-18 AWG Part Number: BFN-2218In stockUse this female bullet connector to quickly connect and disconnect 22-18 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 22-18 AWG and 16-14 AWG male bullet connectors.
-
$0.09 ea.22-18 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 22-18 AWG Part Number: BMN-2218In stockUse this male bullet connector to quickly connect and disconnect 22-18 AWG wire. The insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 22-18 AWG and 16-14 AWG female bullet connectors.
-
$0.69 ea.Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250In stockCable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$2.99 ea.Waterproof Mini Automotive Fuse Holder - Waterproof Part Number: WMFHIn stockFuse Holder with Waterproof Cap and pigtail wires. Takes blade-mounting Mini fuses sold separately above- 12 Gauge 4" wire leads. Price for each. -
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$1.99 ea.Heavy Duty Mount for Cable Ties Part Number: HDM-xIn stockHeavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16").
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.25 ea.Automotive Mini Blade Fuses Part Number: MAF-xIn stockMiniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available. -
View all
Installation Supplies14 additional compatible accessories
-
$0.99 ea.Mini ON/OFF Toggle Switch - Wired - Mini ON/OFF Toggle Switch - Wired Part Number: WRTS-SP-WIn stockON/OFF Single throw (SPST) Toggle Switch. Two 1/10in WIRED Male solder lug Contact Terminals 10A @ 12VDC. Mounting stem is 1/4in diameter and fits panels up to 1/8in thick. -
$2.49 ea.LED Indicator SPST Round Rocker Switch Part Number: RRS-SPxIn stockON/OFF Round Rocker Switch with LED indicator, three 3/16" male contact terminals with #6 screw contacts. Use SCFP-2218 3/16" female push-on connector. 15 Amp max at 12VDC. Mounting hole 13/16" in diameter and fits panels up to 1/8" thick.
-
$12.99 ea.Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6AIn stock
This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is within 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates within a 12-24 VDC range. Price for each.
-
$7.99 ea.PIR Motion Sensor Switch - 12-24 VDC - 8 Amps - PIR switch Part Number: LPIR-8AIn stockThis PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights for 10 seconds when human motion is detected. Designed to save energy and prolong the life of your LED lights. Motion detection range is with in 15' of the PIR sensor. The single-channel sensor has an 8-Amp maximum load and operates with in a 12-24 VDC range. Price for each.
Reviews
4.5 / 5 stars
7 reviews
4.5 / 5 stars
7 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*