Round LED Truck Trailer Light with Reflector - 4" LED Stop Turn Tail Light with 40 LEDs

Round LED Truck and Trailer Lights - 4" Stop / Turn / Tail Lights - 3-Pin Connector - Flush Mount - 40 LEDs - Red

Part Number
ST-RHB40

Features

  • Industry-standard 3-pin socket
  • DOT, SAE, CE, and RoHS compliant
  • IP65 weatherproof rated sealed construction
  • 3-pin plugs, grommet, and mounting bracket (sold separately)
  • Lifetime warranty
View more details
Clearance

Starting at $16.99 ea.
Frequently Bought Together
Round LED Truck and Trailer Lights w/ Reflector - 4
$14.99 ea.
+
4" Round Grommet for Trailer Lights
$3.49 ea.
+
Total Price: $20.97

Overview

This 4" round 40 LED light with honeycomb reflector meets DOT FMVSS 108 requirements for vehicle signal lighting such as a tail light, turn light, hazard light, stop light, reverse, or backup light. The light has a sonically sealed polycarbonate lens and weatherproof housing for harsh outdoor conditions. Flush mounts easily with a separate grommet or flange and a 3-pin connector to provide stop, turn, or tail lights on vehicles (see accessories). Dimensions: 4.31”(10.95cm) x 2.31”(5.4cm)

Product Details:

  • Sealed polycarbonate housing and lens
  • IP65 rated
  • 3-pin plug socket
  • Flush mount with flange or grommet
  • 9 - 14.8 VDC range
  • CE, DOT, SAE, and RoHS compliant
  • Lifetime Warranty
CE
CE
DOT
DOT
Lifetime
Lifetime
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Emergency Vehicle Lighting
  • Semi-Truck Light
  • Freightliner Light
  • Flatbed Truck Lights
  • Trailer Lights
  • Tow Truck Lights
  • Box Truck Lights
  • RV Lights
  • Campers
  • Service Vehicle Lighting
  • Turn Lights
  • Tail Lights
  • Brake Lights
  • Hazard Lights
  • Parking Lights

Specifications

DOT Standard FMVSS 108
IP Rating IP65
Mount Type Flange
PC Rated No
Standards And Certifications CE, DOT Compliant
Volts 9~14.8 VDC
Print Specifications
Swipe left to see additional specifications
Part NO Current Draw
ST-AHB40 0.03A (30mA), 0.18A (180mA)
ST-RHB40 0.03A (30mA), 0.21A (210mA)

Accessories & Power Supplies

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  3. View all

    All Accessories

    1 additional compatible accessories

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  3. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  4. psb-x-hole-snap-bushing

    $0.08 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  5. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  1. Automotive Mini Blade Fuses

    $0.25 ea.
    Automotive Mini Blade Fuses Part Number: MAF-x
    In stock
    Miniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available.
  1. ST Series Mounting Flange for 4” Round Trailer Lights

    $1.49 ea.
    ST Series Mounting Flange for 4” Round Trailer Lights Part Number: FLx-40
    In stock
    Flange available for 4 Inch diameter ST Series Truck Lights. Flange or Grommet is used for mounting, not both.

Reviews

3.4 / 5 stars
6 reviews

Write Your Own Review

Write a Review

You're reviewing: Round LED Truck and Trailer Lights - 4" Stop / Turn / Tail Lights - 3-Pin Connector - Flush Mount - 40 LEDs - Red

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs