Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
M4-HB series High Brightness 2.5in Round LED Marker Lamp: Available In White, Red & Amber

LED Clearance or Side Marker Light - 2-1/2" Round - 4 LEDs

Part Number
M4-xHB4
In Stock

$6.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
10 photos
Most Popular
  1. Right Angle 2-PIN Plug
    Right Angle 2-Wire Pigtail for Trailer Lights - 2-Pin PL-10 Plug - 6" Lead
    $1.99 ea.
  2. M4 series Mounting Grommet for 2.5in Round LED Marker Lamp
    2-1/2" Round Grommet for Trailer Lights
    $2.49 ea.
Loading...

Overview

Designed to accept industry standard 2-pin plugs, this 2-1/2” round LED light meets DOT FMVSS 108 requirements for use as side lights and clearance lights. Mounts flush with compatible grommet or flange (sold separately). Each light boasts 4 high-flux LEDs that operate with in a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Also see similar clear-lens version.
Lifetime
Lifetime
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

IP Rating IP65
Mount Type Flange
Voltage 9-14.8 VDC
PC Rated No
Print Specifications
Swipe left to see additional specifications
Part NO Current Draw DOT Standard Standards And Certifications
M4-AHB4 0.07A (70mA) FMVSS 108 DOT Compliant
M4-RHB4 0.07A (70mA) FMVSS 108 DOT Compliant
M4-WHB4 0.05A (50mA)

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Grommets
Installation Supplies
Connectors
Mounting
Most Popular

Accessories Links

Accessory Category
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  3. Right Angle 2-PIN Plug
    $1.99 ea.
    Right Angle 2-Wire Pigtail for Trailer Lights - 2-Pin PL-10 Plug - 6" Lead Part Number: PL-2S
    In stock
    Designed for MSM, M4, and M5 series marker lights, the right angle 2-pin plug feature 6 inch wires allowing for easy installation.
  4. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  5. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  6. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  7. M4 series Mounting Grommet for 2.5in Round LED Marker Lamp
    $2.49 ea.
    2-1/2" Round Grommet for Trailer Lights Part Number: GR-25
    In stock
    Designed for 2 1/2 inch round M4 series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights with out a built-on flange.
  8. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  9. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  10. 16 Gauge Wire - Four Conductor Power Wire
    $0.99 per Foot
    4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
    In stock
    This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
  11. Connector Wire
    $2.49 ea.
    2-Wire Pigtail for Trailer Lights - Female Bullet Plug - 10" Lead Part Number: PLF-02
    In stock
    Designed to mate with PBM and MOC series trailer lights and truck lights, the straight 2-pin female bullet connector features 10 inch wires allowing for easy installation.
  12. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back
    $4.99 ea.
    Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back Part Number: A57GB
    In stock

    Recess mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  2. Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back
    $3.49 ea.
    Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back Part Number: A55GB
    In stock

    Mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  3. Grommet for 2-1/2" Round Peterson Clearance and Side Marker Lights - Flush Mount
    $4.99 ea.
    Grommet for 2-1/2" Round Peterson Clearance and Side Marker Lights - Flush Mount Part Number: B142-18
    In stock

    Flush mount 6.5" round trailer light using the black open back grommet. Fits 3" mounting holes.

  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  3. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  4. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  5. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  6. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  7. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  8. 16 Gauge Wire - Four Conductor Power Wire
    $0.99 per Foot
    4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
    In stock
    This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
  9. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  10. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  1. Right Angle 2-PIN Plug
    $1.99 ea.
    Right Angle 2-Wire Pigtail for Trailer Lights - 2-Pin PL-10 Plug - 6" Lead Part Number: PL-2S
    In stock
    Designed for MSM, M4, and M5 series marker lights, the right angle 2-pin plug feature 6 inch wires allowing for easy installation.
  2. Connector Wire
    $2.49 ea.
    2-Wire Pigtail for Trailer Lights - Female Bullet Plug - 10" Lead Part Number: PLF-02
    In stock
    Designed to mate with PBM and MOC series trailer lights and truck lights, the straight 2-pin female bullet connector features 10 inch wires allowing for easy installation.
  3. Right Angle 2-Wire Pigtail for Peterson Trailer Lights - 2 Pin PL-10 Plug - 10-1/2" Long
    $7.99 ea.
    Right Angle 2-Wire Pigtail for Peterson Trailer Lights - 2 Pin PL-10 Plug - 10-1/2" Long Part Number: B421-49
    In stock

    Hardwire LED truck and trailer lights to power using the 2-wire PL-3 pigtail harness. Stripped hot wire and ground wire with ring terminal. Right angle plug for single or double contact.

  1. M4 series Surface Mount Adapter
    $2.99 ea.
    Branch Deflector Bracket for 2-1/2" Round Trailer Lights Part Number: M4-SA
    In stock
    Polycarbonate surface mount adapter with PVC grommet for 2-1/2" round marker lamps. Allows quick and easy mounting of M4 series lamps. Flange and grommet only. Measures 146mm(5.75 in) x 78mm(3.07 in) x 31mm(1.22 in). Price for each.
  2. M4 series Chrome Bezel with Hood
    $3.49 ea.
    Chrome Bezel with Visor for 2-1/2" Round Trailer Lights Part Number: KC-25
    In stock
    Chrome plated plastic bezel with Hood Visor for 2.5 Inch Round M4 Series Truck Lights. Includes stainless steel mounting screws. Price for each.
  1. Right Angle 2-PIN Plug
    $1.99 ea.
    Right Angle 2-Wire Pigtail for Trailer Lights - 2-Pin PL-10 Plug - 6" Lead Part Number: PL-2S
    In stock
    Designed for MSM, M4, and M5 series marker lights, the right angle 2-pin plug feature 6 inch wires allowing for easy installation.
  2. M4 series Mounting Grommet for 2.5in Round LED Marker Lamp
    $2.49 ea.
    2-1/2" Round Grommet for Trailer Lights Part Number: GR-25
    In stock
    Designed for 2 1/2 inch round M4 series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights with out a built-on flange.

Reviews

4.7 / 5 stars
21 reviews

Write Your Own Review

Write a Review

You're reviewing: LED Clearance or Side Marker Light - 2-1/2" Round - 4 LEDs

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.