Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
Rectangle LED Dome Lights - LED Interior Trailer Lights - Pigtail Connector - Surface Mount - 480 Lumens

LED Interior Trailer Dome Light - Surface Mount - 480 Lumens - Rectangle - 12V/24V

Part Number
MR9-W24

Features

  • Surface mount interior dome light
  • Sealed against water - submersible 1m up to 30min
  • High brightness with in low profile frame
  • 12-28 VDC
  • Lifetime warranty
View more details
In Stock
$10.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
5 photos
Loading...

Overview

MR series Rectangle LED Light provides a bright task light for the interior of trailers and other low voltage applications. Polycarbonate lens and housing is impact resistant and sealed against moisture. Low profile easily surface mounts to vehicle surfaces with included pigtail wires and mounting screws.
Product Details:
  • Red and amber versions also available
  • Impact resistant housing
  • Includes 2 mounting screws
  • Includes 20-guage wire pigtail connector
  • 12-28 VDC
  • Rated 50000 hours L70 lifespan
  • Rated IP67 - submersible 1m up to 30min
  • Lifetime warranty
Lifetime
Lifetime
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Vans
  • Truck And Car Cabin Lights
  • RV Interiors
  • Interior Vehicle Lights
  • RV/Truck/Car Dome Lights
  • Interior Trailer Lights

Specifications

Current Draw 400 mA @ 12 VDC
IP Rating IP67
Material Plastic
Mount Type Surface
Voltage 12-28 VDC
PC Rated No
Print Specifications

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Installation Supplies

Accessories Links

Accessory Category
  1. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
  2. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  3. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  4. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  5. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  6. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  7. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  8. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  9. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  10. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  11. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  1. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
  2. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  3. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  4. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  5. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  6. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  7. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  8. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  9. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  10. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  11. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.

Reviews

5 / 5 stars
4 reviews

Write Your Own Review

Write a Review

You're reviewing: LED Interior Trailer Dome Light - Surface Mount - 480 Lumens - Rectangle - 12V/24V

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.