LED Products

2 of 2 Results
of 1
1.
LDRF-RGB8-TC3x
Show Details
Finish
 Black   White 
Volts
Amps
24A
Polarity
Output Voltage DC
12~24 VDC
Suitable for Vehicles
Yes
Available Finishes
Channels
Amps Per Channel
8 Amps/CH
Input Voltage DC
12 ~ 24V DC
Connection Type
Screw Terminals
Dim Control
Remote Control, Conventional Dimming
Remote Control
Radio Frequency (RF)
Battery Type
3 x AAA
Use this RGB LED controller with wireless touch-color RF remote to control your RGB LED light strips. Choose from 29 dynamic color-changing modes with adjustable speed and brightness levels or from static color and white modes with adjustable brightness levels, and control your light strip from up to 65' away. The remote is completely touch activated with a color wheel for direct, fine-tuned color selection. The remote also has power, pause, brightness control, dynamic mode selection, and speed-selection touch buttons. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The polarity-sensitive controller has a maximum load capacity of 8 amps per red, green, or blue channel and is compatible with LED light strips that operate within a 12-24V DC range. Red and green lights on the controller let you see when it is receiving power and signal from the RF remote. Screw slots allow for permanent controller mounting. Remote is available in white or black and requires 3 AAA batteries (not included).
In Stock
$39.95 / set
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
$39.95 / set
  • Part Number:
View More Information
Make Your Selections
Qty
2.
LDRF-RGB6-TC3
Show Details
Finish
N/A
Volts
Amps
18.00 Amps
Polarity
N/A
Output Voltage DC
N/A
Suitable for Vehicles
Yes
Finish
N/A
Channels
Amps Per Channel
6 Amps/CH
Input Voltage DC
N/A
Connection Type
Screw Terminals
Dim Control
N/A
Remote Control
Radio Frequency (RF)
Battery Type
3 x AAA
Universal Red/Green/Blue (RGB) LED Controller & Dimmer with handheld RF Remote Color Wheel can control any 12~24VDC RGB LED products. Select from several static Single Color modes or 7 dynamic color-changing modes with speed, dimming, ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total.
In Stock (Clearance)
Was $29.88
Now $24.88 / set

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
Was $29.88
Now $24.88 / set
  • Part Number:
View More Information
Make Your Selections
Qty
2 of 2 Results
of 1

Send us your Feedback