LED UFO High Bay Emergency Battery Backup - 40W - 100-347 Input - 170 VDC Output

LED UFO High Bay Emergency Battery Backup - 40W - 100-347 Input - 170 VDC Output

Part Number
EMUFO-40170-YYII

Features

  • 90-minute constant emergency power
  • Wide input voltage range: 100-347 VAC
  • 170 VDC output in-line with power
  • 24 hour full recharge time
  • UL 924 Listed
  • CEC Title 20
View more details
In Stock
$229.99 ea.

Overview

The emergency driver automatically provides backup battery power to LED UFO high bay drivers at a rated output voltage of 170 VDC. The internal lithium-ion battery provides backup light for a minimum of 90 minutes and has a 24 hours recharge time. The driver has a wide input voltage of 100-347 VAC. The constant wattage design maintains the output wattage even as the system voltage diminishes. The UL 924 Listed certification meets or exceeds specific safety and fire hazard codes required for commercial properties in the United States. Self-test using the switch on the driver or with an optional RF test remote.
Product Details:
  • Powers up to 300W UFO high bays
  • Compatible with lights equipped with 0-10V Dimming
  • Operating temperature: 32°–122° F (0°–50° C)
  • IP65 waterproof rating
  • Surge Protection: 3kV
  • Lithium-ion battery
  • 5-year warranty
UL Listed
UL Listed
5 Years
5 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Battery Type Li-ion
Emergency Operation Time 90 Minutes
Environmental Rating Suitable for Wet Locations, Waterproof
Finish Red
Input Connection Type Pigtail
IP Rating IP65
Material Aluminum Housing
Operating Temperature 0~+50 °C (32~+122 °F)
Output Voltage 170 VDC
Power Consumption 40 Watts
Product Weight 4lb 9.6oz (2.09kg)
Standards And Certifications CEC Title 20, UL Listed
UL File Number E504476
UL Standard UL 924
Volts 100-347 VAC
Wire Gauge 18 AWG
Print Specifications

Accessories & Power Supplies

  1. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  1. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: LED UFO High Bay Emergency Battery Backup - 40W - 100-347 Input - 170 VDC Output

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs