Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
Emergency Battery Backup and Driver - 20W - 100-277V Input - 20-50 VDC Output

Emergency Battery Backup and Driver - 20W - 100-277V Input - 20-50 VDC Output

Part Number
EMB20YY-050

Features

  • 90-minute constant emergency power
  • Wide input voltage range: 100-277 VAC
  • 20-50 VDC output parallel to driver with fixture
  • Powers 0-10V dimmable fixtures up to 180W
  • UL 924 Listed
  • CEC Title 20
View more details
Out of Stock
Backorder Available
$74.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
8 photos
Loading...

Overview

When AC supply power is lost in a power outage, the emergency driver switches on automatically to provide backup battery power directly to LED arrays at a rated output voltage of 20-50 VDC. The internal lithium-ion battery provides backup light for a minimum of 90 minutes and has a 24-hour recharge time. The battery backup has a wide input voltage of 100-277 VAC and powers fixtures up to 180W. The constant wattage power design maintains the output wattage even as the system voltage diminishes. The UL 924 Listed certification meets or exceeds specific safety and fire hazard codes required for commercial properties in the United States.
Product Details:
  • Slim profile for in-fixture applications
  • Operating temperature range of 32°-122º F
  • IP65 waterproof rating
  • Surge protection: 3kV
  • Lithium-ion battery
  • 5-year warranty
UL Listed
UL Listed
5 Years
5 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Emergency Lighting
  • Linear High Bays
  • Linear Strip Fixtures
  • Panel Lights
  • Troffer Fixtures
  • Commercial Downlights

Specifications

Ambient Operating Temperature Range 0~+50 °C (32~+122 °F)
Battery Type Li-ion
Certifications/Compliance California Title 20, UL Listed
Emergency Operation Time ≥90 Minutes
Input Connection Type Pigtail
IP Rating IP65
Output Voltage 20-50 VDC
Surge Protection 3 kV (L-N)
Print Specifications

All specifications are subject to change without notice. All products are RoHS compliant.

Documents
EMB20YY-050 User Manual

Accessories & Power Supplies

All Accessories
Installation Supplies

Accessories Links

Accessory Category
  1. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  2. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
  3. 22-16 AWG Grey 3M Twist-On Wire Connector
    $0.09 ea.
    22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
    In stock
    Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
  4. 24-18 AWG Wire Splice Quick Connectors - Dual Channel Terminal Splice Pair
    $1.49 ea.
    22-18 AWG Wire Splice Quick Connectors - Dual Conductor Terminal Splice Pair - SQ2C Part Number: SQ2C
    In stock

    These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. Price per pair. Also available in a 3-connector kit with Y splitter.

  5. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.99 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  6. 22-18 AWG Butt Connector
    $0.12 ea.
    22-18 AWG Butt Connector - Non-Moisture Resistant 22-18 Part Number: BCN-R
    In stock
    Butt Connector with insulated Nylon. Available in 16-14 AWG size (Blue) and AWG size 22-18(Red). Also available moisture resistant. Price for each.
  1. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  2. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
  3. 22-16 AWG Grey 3M Twist-On Wire Connector
    $0.09 ea.
    22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
    In stock
    Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
  4. 24-18 AWG Wire Splice Quick Connectors - Dual Channel Terminal Splice Pair
    $1.49 ea.
    22-18 AWG Wire Splice Quick Connectors - Dual Conductor Terminal Splice Pair - SQ2C Part Number: SQ2C
    In stock

    These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. Price per pair. Also available in a 3-connector kit with Y splitter.

  5. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.99 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  6. 22-18 AWG Butt Connector
    $0.12 ea.
    22-18 AWG Butt Connector - Non-Moisture Resistant 22-18 Part Number: BCN-R
    In stock
    Butt Connector with insulated Nylon. Available in 16-14 AWG size (Blue) and AWG size 22-18(Red). Also available moisture resistant. Price for each.

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: Emergency Battery Backup and Driver - 20W - 100-277V Input - 20-50 VDC Output

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.