Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
DiodeDrive® Emergency Back-Up LED Driver - 20W

DiodeDrive Emergency Back-Up LED Driver - 20W - 15-55 VDC output

Part Number
CCED-20W-1555-96CHX-FC

Features

  • At least 90 minute operation in emergency mode
  • LiFePO4 battery - full recharge in 48 hours after complete discharge
  • Constructed of durable galvanized steel
  • Wide range input voltage - 120–277 VAC
  • 363 mA constant current 15–55 VDC output
  • 20-watts max
  • UL924 Listed
  • 5 year warranty
View more details
In Stock
$129.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
9 photos
Loading...

Overview

The DiodeDrive CCED Emergency LED driver is an emergency battery pack that works with LED drivers in commercial luminaires for use in emergency power outages. When AC power is lost in the event of a power outage, the emergency driver operates to provide backup battery power at a rated output voltage of 15-55 VDC. 10x the shelf life of traditional lead acid batteries, the superior LiFePO4 batteries provide backup light for a minimum of 90 minutes. The UL924 Listed device allows for both field and factory installations of suitable LED luminaires.
Product Details:
  • Flexible conduit houses all external wires for fixture connections
  • Remote test switch/charge indicator module (included) fits in a single-gang box
  • Soft switching to prevent voltage spikes and increase longevity of the LED modules
  • Operating temperature range of 32°–131° F
  • 3kV surge protection
  • 18 AWG pigtails
  • Wide range input voltage - 120–277 VAC
  • 363 mA constant current 15–55 VDC output
  • Rated IP30, suitable for damp locations
  • Open/Short/Over-Voltage/Over Temperature protection
  • UL924 Listed, Meets CEC Title 20 efficiency standards
  • 5 year warranty
UL Listed
UL Listed
FCC
FCC
5 Years
5 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Linear High Bays
  • Linear Strip Fixtures
  • Panel Lights
  • Troffer Fixtures
  • Commercial Downlights

Specifications

Ambient Operating Temperature Range 0~+55 °C (32~+131 °F)
Battery Type 9.6 V LiFePO4
Certifications/Compliance CEC Title 20, FCC, UL Listed
Dimmable No
Environmental Rating Non-weatherproof, Suitable for Damp Locations
Input Connection Type Pigtail
Input Voltage 120–277 VAC
IP Rating IP30
Output Current 363 mA
Output Voltage 15–55 VDC
Surge Protection 3 kV
Print Specifications

All specifications are subject to change without notice. All products are RoHS compliant.

Documents
CCED User Manual
CCED Specification Sheet

Accessories & Power Supplies

All Accessories
Installation Supplies
Wiring

Accessories Links

Accessory Category
  1. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  2. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
  3. 22-16 AWG Grey 3M Twist-On Wire Connector
    $0.09 ea.
    22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
    In stock
    Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
  4. 24-18 AWG Wire Splice Quick Connectors - Dual Channel Terminal Splice Pair
    $1.49 ea.
    22-18 AWG Wire Splice Quick Connectors - Dual Conductor Terminal Splice Pair - SQ2C Part Number: SQ2C
    In stock

    These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. Price per pair. Also available in a 3-connector kit with Y splitter.

  5. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.99 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  6. 22-18 AWG Butt Connector
    $0.12 ea.
    22-18 AWG Butt Connector - Non-Moisture Resistant 22-18 Part Number: BCN-R
    In stock
    Butt Connector with insulated Nylon. Available in 16-14 AWG size (Blue) and AWG size 22-18(Red). Also available moisture resistant. Price for each.
  1. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  2. 22-16 AWG Grey 3M Twist-On Wire Connector
    $0.09 ea.
    22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
    In stock
    Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
  3. 24-18 AWG Wire Splice Quick Connectors - Dual Channel Terminal Splice Pair
    $1.49 ea.
    22-18 AWG Wire Splice Quick Connectors - Dual Conductor Terminal Splice Pair - SQ2C Part Number: SQ2C
    In stock

    These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. Price per pair. Also available in a 3-connector kit with Y splitter.

  4. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.99 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  5. 22-18 AWG Butt Connector
    $0.12 ea.
    22-18 AWG Butt Connector - Non-Moisture Resistant 22-18 Part Number: BCN-R
    In stock
    Butt Connector with insulated Nylon. Available in 16-14 AWG size (Blue) and AWG size 22-18(Red). Also available moisture resistant. Price for each.
  1. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.

Reviews

4.5 / 5 stars
2 reviews

Write Your Own Review

Write a Review

You're reviewing: DiodeDrive Emergency Back-Up LED Driver - 20W - 15-55 VDC output

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.