DiodeDrive Emergency Battery Backup Driver - 40W - 100-347 VAC Input - 170 VDC Output
Features
- 90-minute constant emergency power
- Wide input voltage range: 100-347 VAC
- For wiring to the LED driver's AC input
- Automatic self-testing, test switch/indicator included
- Uses 0-10V dimming wires for fixtures up to 300W
- UL 924 Listed
- CEC Title 20
Loading recommendations...
Overview
Product Details:
- Flexible conduit houses external wires
- IP44 water resistant rating
- Lithium-ion battery
- Works with fixtures up to 300W using the 0-10V dimming inputs
- 0-10V dimming connections not required for fixtures up to 40W
- 5-year warranty
- Commercial Downlights
- Emergency Lights
- High Bays
- Linear High Bays
- Linear Strip Fixtures
- Panel Lights
- Troffer Fixtures
Specifications
Ambient Operating Temperature Range | 0~+50 °C (32~+122 °F) |
---|---|
Battery Type | Li-ion |
Brand | DiodeDrive |
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact, energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else who may be involved confidence that the product is safe and will work well in their application. UL and ETL certifications relate to safety and installation and are the most common for power supplies. |
UL Listed |
Dimmable | Yes |
Dimming Control
Dimming Control
TRIAC Dimming: This is the most commonly recognized dimming type, with TRIAC Dimmers found in most Home Centers and hardware stores. TRIAC (TRIode for Alternating Current) dimmers operate by modifying the voltage waveform, reducing the amount of power input to the device being controlled. Reducing the input power will result in a corresponding reduction in a power supply's output voltage/current or a decrease in the lumen output of a light fixture. TRIAC dimmers come in two variations: MLV and ELV.
0-10V Dimming: This type of dimming control is most commonly found in commercial applications. It works by varying a voltage from 0 to 10 VDC on dedicated dimming wires. The output of a power supply or light fixture is proportional to the voltage applied. Pulse-Width Modulation (PWM) Dimming: This dimming control adjusts output by rapidly turning the output on and off at a fixed frequency. The proportion of on-time to total time sets the dimming percentage. Potentiometer Dimming: Potentiometer dimming varies the output using a variable resistor, or potentiometer, to set the dimming level. |
0-10V |
Emergency Operation Time | 90+ Minutes |
Environmental Rating
Environmental Rating
|
Suitable for Damp Locations |
Input Connection Type | Pigtail |
Input Voltage | 100-347 VAC |
Max Input Current | 100 mA @ 120 VAC, 43 mA @ 277 VAC |
IP Rating
IP Rating
|
IP44 |
Output Voltage | 170 VDC |
Recharge Time | 24 Hours |
Surge Protection | 3 kV (L-N) |
Warranty | 5 Year |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs