|Standards And Certifications||RoHS Compliant|
|Strip Width||11mm (0.43in)|
|B1718ANODA_1||Klus||Silver Anodized||3.3ft (1m)||Not Included||Aluminum|
|B1718ANODA_1-C||Klus||Silver Anodized||3.3ft (1m)||Clear||Aluminum|
|B1718ANODA_1-F||Klus||Silver Anodized||3.3ft (1m)||Frosted||Aluminum|
|B1718ANODA_2||Klus||Silver Anodized||6.6ft (2m)||Not Included||Aluminum|
|B1718ANODA_2-C||Klus||Silver Anodized||6.6ft (2m)||Clear||Aluminum|
|B1718ANODA_2-F||Klus||Silver Anodized||6.6ft (2m)||Frosted||Aluminum|
|B1718K7_1||Klus||Black Anodized||3.3ft (1m)||Not Included||Aluminum|
|B1718K7_1-C||Klus||Black Anodized||3.3ft (1m)||Clear||Aluminum|
|B1718K7_1-F||Klus||Black Anodized||3.3ft (1m)||Frosted||Aluminum|
|B1718K7_2||Klus||Black Anodized||6.6ft (2m)||Not Included||Aluminum|
|B1718K7_2-C||Klus||Black Anodized||6.6ft (2m)||Clear||Aluminum|
|B1718K7_2-F||Klus||Black Anodized||6.6ft (2m)||Frosted||Aluminum|
|B1718L9010_1||Klus||White||3.3ft (1m)||Not Included||Aluminum|
|B1718L9010_2||Klus||White||6.6ft (2m)||Not Included||Aluminum|
|B1718NA_1||Klus||Silver Non-Anodized||3.3ft (1m)||Not Included|
|B1718NA_1-C||Klus||Silver Non-Anodized||3.3ft (1m)||Clear|
|B1718NA_1-F||Klus||Silver Non-Anodized||3.3ft (1m)||Frosted|
The extrusion made from high quality aluminum (also available in a double-anodized version) is designed for flexible or rigid LED strips that are 8-10mm wide. One of the accessories offered for the extrusion are covers that shade and protect LEDs inside the profile. There are three covers available: cover-K (frosted or transparent), HS (frosted or transparent) or clear focusing cover-S, which allows you to obtain 10 degree light beams angle. Covers are made of polycarbonate. Standard polypropylene end caps, electricity- conductive end caps and mounting brackets (made of steel, zinc or chrome finish) are used for the extrusion as supplementary accessories. End caps protect the extrusion from dust and other undesirable elements, which can make LED strips dirty and consequently deteriorate the lighting parameters. The extrusion can be mounted to surfaces with the use of double-sided adhesive tape or mounting brackets. The mounting bracket guarantees easy and secure mounting of the extrusion to a desired surface. It can also work as a connector between two extrusions.
Integrated, straight line of light can be achieved by assembling: the extrusion, frosted HS cover and densely spaced LEDs.Applications
The extrusion with the LED light source is mostly used as interior lighting, especially to light cabinets, stairs, glass cases, or as a decoration light for a niche in drywall ceilings.
Small dimensions, easily release heat, simple assembly, lightweight, environment friendly.