Name: 30" LED Light Bar - Combination Beam - 12,250 Lumens - 5700K
Brand: Super Bright LEDs
SKU: ORBU30-85WS-CB
Price: 129.99 USD
Availability: InStock

Overview

The high-performance 30" LED light bar with combination beam uses an 8° spot light beam with a 60° flood light beam for increased visibility. The spot light beam enhances long-range visibility and the flood light beam enhances general area lighting. The sleek, singular row of LEDs delivers 12,250 lumens of light for on-road or off-road applications. It is constructed of corrosion-resistant aluminum housing with a polycarbonate lens. The attached DT connector provides a simple, reliable connection to a standard DT wiring harness. A steel mounting bracket and stainless steel hardware are included.

Product Details:

Aluminum housing and polycarbonate lens
Pigtail adapter for DT connection included
IP67 waterproof rating
12-24 VDC
Lifetime Warranty

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Ambient Operating Temperature	-25~+65 °C (-13~+149 °F)
Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	8°;60°
Beam Pattern Spot Lights Spot lights give off a narrow and concentrated beam of light that allows for greater visibility at further distances. With light output stretching beyond that of standard headlights. Spot lights are best used to navigate dark back roads for everything from recreational vehicles to work trucks and search and rescue vehicles. Flood Lights Flood lights are best at illuminating a wider area at a shorter distance than typical headlights. These are great for use on vehicles performing tasks at night such as roadwork or harvesting, as well as use on curvy roads and side roads. Combo Beams Combo vehicle lights are a combination of a spot light and a flood light that are always on simultaneously. This allows for the light to cover both short and long distances at the same time for a variety of tasks. Selectable Multibeams Selectable multibeams contain both a spot light and a flood light. With this, you gain the ability to have either the spot light or the flood light, or both on at the same time. Selectable multi-beams are extremely versatile in that you get three beam patterns in a single light. However it does require additional wiring to operate both beams independently through either multiple rocker switches, or a momentary switch. Combo + Side Shooters Side shooters illuminate a full 180 degrees or more through the use of a combo beam vehicle light. Side shooters contain an extra row of vertically or horizontally stacked and angled LED lights. This row is what gives the side shooter the ability to expand beyond a normal flood light's field of view. Side shooters are best used while stationary or at very low speeds where the field of view is critical.	Combo Beam
Brand	Super Bright LEDs
Color	Cool 5700K
Color Temperature	5700K
Current Draw Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	7.1 A @ 12 VDC
Environmental Rating Learn more about environmental rating	Waterproof
Finish	Black
Input Connection Type	DT Connector
Input Voltage	12-24 VDC
Intensity	12250 Lumen
IP Rating Learn more about IP rating	IP67
Power Consumption	150 Watts
Product Materials	Aluminum Housing, Polycarbonate Lens, Stainless Steel Hardware, Steel Bracket
Rows Of LEDs	Single
Series	Ultra Series
Warranty	Lifetime
Wire Gauge	18 AWG

Print Specifications

Accessories & Power Supplies

All Accessories

Switches

Installation Supplies

Connectors

Mounting

Wiring Harnesses

Flashers & Relays

Accessories Links

Accessory Category

Accessory Type:

$0.39 ea.

Black Cable Ties - 10 Pack Part Number: CT-B-10
In stock

4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.

$7.99 ea.

Deutsch Connector Splitter Cable - 1 Female to 2 Male DT Connector - DT1F2M Part Number: DT1F2M
In stock

DT series Splitter Cable connects two separate lights to a single wire harness. They provide a simple wiring setup with an easy plug-and-play application. Ideal for LED work lights and off-road light bars, the cable is built to maintain electrical connections through rough terrain and exposure to the elements.
$3.99 ea.

DT Pigtail Connector - Male - Male Part Number: DT-MPT
In stock

2-Contact male DT connector with 30cm(11.8in) long 16 AWG wire. Max current rated at 15 amps. Mates with DT-FPT female DT connector.
$3.99 ea.

DT Pigtail Connector - Female - Female Part Number: DT-FPT
In stock

2-Contact female DT connector with 30cm(11.8in) long 14 AWG wire. Max current rated at 15 amps. Mates with DT-MPT male DT pigtail connector.
$9.99 ea.

Deutsch DT Connector 4-Way Splitter Cable - DT Pigtail Connector Male Part Number: DT-1F4M
In stock

DT series Splitter Cable enables up to 4 separate lights to be connected to a single wire harness. Designed for a simple wiring setup and easy plug-and-play application. Ideal for LED work lights and off-road light bars, the harness is built to maintain electrical connections despite rough terrain and exposure to the elements. Additional male pigtail adapter included for direct wire connections.
$8.99 ea.

Deutsch DT Connector 3-Way Splitter Cable - DT Pigtail Connector Male Part Number: DT-1F3M
In stock

DT series Splitter Cable enables up to 3 separate lights to be connected to a single wire harness. Designed for a simple wiring setup and easy plug-and-play application. Ideal for LED work lights and off-road light bars, the harness is built to maintain electrical connections despite rough terrain and exposure to the elements. Additional male pigtail adapter included for direct wire connections.

$19.99 ea.

LED Light Wiring Harness with Switch and Relay - DT Connector - Single Channel - Wiring Harness - CH1 Part Number: WH-DTS10
In stock

Complete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, and automotive relay with solder-less spade connections. 115 in length with 1 x 6 in DT pigtail adapter. Kits have maximum load of 18 Amps. Wiring harness is only for 12V products.
$19.99 ea.

LED Light Wiring Harness with Switch and Relay - Dual Output, DT Connector - Wiring Harness - CH2 Part Number: WH-DTD15
In stock

Complete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, and automotive relay with solderless spade connections. See drawing below for dimensions. Maximum load of 5.5 Amps per channel.

$19.99 ea.

Strobe Light Controller with Wireless Key Fob Remote - Dual 24W Outputs - 16 Strobe Patterns Part Number: LMC-700A
In stock

Turn any 12V work or vehicle light into a strobe light with LMC series Strobe Light Controller. Convenient Key Fob RF Remote controls lights wirelessly. Power button turns lights on, while UP arrow selects constant ON, and DOWN arrow cycles through 16 unique strobe patterns. Dual output allows 2 lights of up to 24-watts each to be controlled, with flash patterns that either alternate between the lights or strobe simultaneously. Memory feature turns light on in the last mode that was being used. Use this strobe controller to give extra control and safety to emergency and first responder vehicles, work lights, and more. Sturdy plastic construction resists water ingress.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: 30" LED Light Bar - Combination Beam - 12,250 Lumens - 5700K

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

30" LED Light Bar - Combination Beam - 12,250 Lumens - 5700K

Features

Product Photos

Videos

Overview

Info Center

Finding the Right Replacement Bulb

LED Automotive Bulbs

How to Install a Light Bar

Installing a Combination Beam LED Light Bar

Specifications

Spot Lights

Flood Lights

Combo Beams

Selectable Multibeams

Combo + Side Shooters