News, Tips, Tutorials
Whether you're searching for replacements for burned-out bulbs...
Easy and effective vehicle lighting upgrades.
If you’re dying to install your new LED light bar but aren’t sure how, we can walk you through the process...
A step by step guide for easy installation of the Combination Beam LED Light Bar.
| Part NO | Beam Angle |
|---|---|
| WLRM-24W-RE30 | 30° |
| WLRM-24W-RE30-2PK | 30° |
| WLRM-24W-RE60 | 60° |
| WLRM-24W-RE60-2PK | 60° |
The single-output LED light wiring harness with switch, and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 18 Amps. Wiring harness for 12V products only.
40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Relays suitable for use with high power LED Off Road Bars, AUX lights, and other custom applications.
Pre-wired relay socket for use with 12 VDC Bosch type five terminal relays. 3 x 12in 18 AWG power wires and 2 x 12in 16 AWG load wires. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.
$7.99 ea.
$0.39 ea.
$5.95 ea.
$159.99 ea.
$34.99 ea.
Complete Plug and Play wire harness for LED Work Lights and Off Road Light Bars with ATP connectors. Includes On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and an ATP pigtail adapter. Kits have maximum load of 20 Amps (10 Amps per each channel). Wiring harness is only for 12V products.
Complete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and an ATP pigtail adapter. Kits have maximum load of 15 Amps. Wiring harness is only for 12V products.
$5.95 ea.
$34.99 ea.
40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Relays suitable for use with high power LED Off Road Bars, AUX lights, and other custom applications.
Pre-wired relay socket for use with 12 VDC Bosch type five terminal relays. 3 x 12in 18 AWG power wires and 2 x 12in 16 AWG load wires. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.
The single-output LED light wiring harness with switch, and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 18 Amps. Wiring harness for 12V products only.
Complete Plug and Play wire harness for LED Work Lights and Off Road Light Bars with ATP connectors. Includes On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and an ATP pigtail adapter. Kits have maximum load of 20 Amps (10 Amps per each channel). Wiring harness is only for 12V products.
Complete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and an ATP pigtail adapter. Kits have maximum load of 15 Amps. Wiring harness is only for 12V products.
$0.39 ea.
$7.99 ea.
$159.99 ea.
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
.