Name: Mini LED Wall Pack with Photocell - Selectable Wattage and CCT - Up to 100W MH Equivalent - Up to 3,750 Lumens - Bronze
Brand: Super Bright LEDs
SKU: MWP3-SW3B30-BRPM
Price: 38.99 USD
Availability: InStock

Overview

The Mini LED Wall Pack delivers a lot of light and takes up little space. Each wall pack is constructed with a durable plastic housing and an aluminum backing with a bronze finish. Equivalent up to 100W metal-halide fixtures, the field selectable wattage (30W, 20W, 15W) and CCT (3000K, 4000K, 5000K) can be set using the switches under the front panel. If needed, the integrated dusk-to-dawn photocell can be bypassed when the internal sensor is disconnected. These are best used to light your building perimeters and entryways.

Product Details:

Efficient light output in a compact design
Disconnect internal sensor to bypass photocell
100-degree beam angle
IP65 rated, suitable for wet locations
120-277 VAC
Certified by UL
5-year warranty

Applications

Commercial And Industrial Exterior
Commercial Lighting
Doorways
Gas Stations
Industrial Facilities
Metal Buildings
Parking Garages
Pathways
Perimeters
Pole Barns
Security Lighting
Sheds
Steel Buildings

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

Specifications

Ambient Operating Temperature	-40~+50 °C (-40~+122 °F)
Beam Angle	100°
Brand	Super Bright LEDs
CCT Value	3000K, 4000K, 5000K
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	Certified by UL, DLC Premium
CRI	80+
Current Draw	125/170/250 mA @ 120 VAC, 54/72/110 mA @ 277 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
Efficacy	125 lm/W
Environmental Rating	Suitable for Wet Locations, Waterproof
Equivalency	50 Watt Metal-Halide, 70 Watt Metal-Halide, 100 Watt Metal-Halide
Finish	Bronze
Integrated Surge Protection	2.5 kV
IP Rating	IP65
LED Color	Selectable CCT
Lens Type	Polycarbonate
Intensity	1875 Lumens, 2500 Lumens, 3750 Lumens
Mount Type	Junction Box, Surface Mount
Operating Voltage	120-277 VAC
Photocell What is a Photocell and How Does It Work? When an LED light is equipped with a photocell, the light will turn on and off automatically based on the available ambient light. Their unique functionality makes them ideal for outdoor area lighting specifically. Photocells are variable resistors that change the resistance in an electrical circuit depending on the amount of light present where they are mounted. Because of this, they must be mounted in exposed areas where they receive adequate light to function. Photocells, or photocontrols, come in a variety of shapes and sizes and can be integrated into a luminaire or be an added accessory depending on the light. Can a Photocell Be Bypassed? Some lights allow for a photocell to be bypassed as needed. When the photocell is bypassed, it allows for the luminaire to remain on constantly or be controlled by an existing switch or timer. Depending on the type of photocell and how it is installed in the fixture, it may be bypassable using a shorting cap, a slide or DIP switch, or by unplugging the photocell. Consult the user’s manual of the light to confirm which option(s) may be applicable and how to implement them safely. Always use caution and turn off supply power before working on wiring of any type. Shorting Cap Photocells on many commercial applications like parking lot and area lighting applications are mounted externally with a twist-lock socket or adapter. Swapping this for a shorting cap simply closes the circuit on your LED light fixture, which keeps your light in an always-on state. This allows it to be controlled externally as well if a central photocell or switch system is being utilized. DIP Switch or Slide Switch While DIP switches and standard slide switches function differently in most cases, when integrated into the photocontrol system of a light they perform the same function. Switches like these are common on canopy and dusk-to-dawn barn lights. These types of switches allow you to toggle the photocell sensor on or off to fit your needs without any rewiring or replacing parts. Disconnect the Wiring Some photocell designs, such as those commonly found in wall packs, allow the operator to simply unplug the photocell to allow the light to work in an always-on state or be controlled by an external switch.	Integrated Photocell (bypassable internally)
Photocell Operation	Turns on below 50 lx, turns off when back above 120 lx
Power Consumption	15 Watts, 20 Watts, 30 Watts
Power Factor	≥0.9
Product Materials	Aluminum, Polycarbonate
Product Weight	1lb 6oz (0.62kg)
Rated Life (L70)	50000 Hours
UL File Number	E366643
Warranty	5 Year

Print Specifications

Accessories & Power Supplies

Reviews

%

0 / 5 stars

0 reviews

Customer Submitted Photos

Write Your Own Review

Write a Review

You're reviewing: Mini LED Wall Pack with Photocell - Selectable Wattage and CCT - Up to 100W MH Equivalent - Up to 3,750 Lumens - Bronze

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

Mini LED Wall Pack with Photocell - Selectable Wattage and CCT - Up to 100W MH Equivalent - Up to 3,750 Lumens - Bronze

Features

Product Photos

Dimensional Drawings

Overview

Product Details:

Applications

Specifications

What is a Photocell and How Does It Work?

Can a Photocell Be Bypassed?

Shorting Cap

DIP Switch or Slide Switch

Disconnect the Wiring

Accessories & Power Supplies

Reviews

%

0 / 5 stars

0 reviews