MSC2-24W LED Multi-function Strobe Controller - LED Strobe Controller
Part Number:
MSC2-24W
Manufacturer Part Number:
$11.99
ea.
Was
In Stock
Similar Products Available Today
Ask About This Product
Get instant AI-powered answers
Try asking:
Most Popular Compatible Products
Overview
Multi-Function Strobe Controller with right and left outputs and 10 alternating dynamic strobe modes. LED indicator lights on controller demonstrate the mode selected. Power-cycle mode retention allows your light to return to the mode that was selected before it was powered off. Use for LED emergency, warning and hazard lights. 12-24VDC operation. 2 Amp max load. Mount using included double-sided adhesive. Price per unit
Dimensional Drawings
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Specifications
| Brand | Super Bright LEDs |
|---|---|
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Non-weatherproof |
| Finish | Black |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
 |
IP20 |
| Mount Type | Surface Mount |
MSC2-24W LED Multi-function
Strobe Controller
Multi-function Strobe Controller with right and left outputs and 10 alternating dynamic strobe modes.
LED indicator lights on controller demonstrate the mode selected.
Use for LED emergency, warning and hazard lights. 12~24VDC operation - 2 Amp max load.
Mount using included double-sided adhesive.
Specifications
- Output Power: 24W(MAX.)
- Operating ambient temperature: 40 °C~ +50 °C
- Case Material & Size: (ABS(Black color) /46 * 28 * 14mm (L * W * H)
- Wire Length: 120cm (Input), 300cm (Output)
Installation Instructions
- Find a suitable interior mounting location for the controller that allows for convenient access to change modes when desired
- Wire controller outputs directly to desired LED lighting (maximum power consumption 12W per side/channel)
- To change modes quickly press and release the MODE button. TO power off the lights press and hold MODE for 2 seconds
Safety Information
- Supply voltage of this product is 12~24 Volts DC, do not exceed
- Shorting output wires my cause damage to amplifier
- Always observe proper polarity when connecting power and load
- For indoor use only - this product is not waterproof or weatherproof
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed
Get a Quote for
Get 10%
off your order
And be the first to know about the new products, sales, and more.
By providing your phone number, you agree to receive marketing text messages about new
products,
sales, and more.
Consent is not a condition to purchase. Msg and data rates my apply.
Reply HELP for help and STOP to cancel. View our Terms
of
Service and Privacy Policy.
There was an error while subscribing your email address
Please try again later
This email address is already subscribed to our mailing list
Thank you for being a subscriber!
Thank you for signing up!
An email has been sent to
This email address previously signed up to receive emails.
Only first-time subscribers are eligible for % off their next order.
Loading...
Item Added
Part Number:
No accessories available for this product.
Loading...