MaxLite Magnetic 4ft LED Retrofit Bar Kit - Multi-Output Driver - Up To 2,275 Lumens - 4000K
Part Number:
MRBK-41LFM-40
Manufacturer Part Number:
MRBK-41LFL-40, MRBK-41LFM-40, MRBK-41LFH-40
$44.99
ea.
Was
In Stock
Features
- Multi-output driver for selectable power output
- Linear bar with magnetic mounts, driver, and hardware included
- Up to 2,275 lumens
- Natural white 4000K
- DLC 5.1 Premium (12W and 14W only)
Related Products
Overview
Product Details:
- Aluminum housing; Frosted lens
- Magnetic backing for easy installation
- 120-277 VAC
- UL Classified
- 5-year warranty
- DLC 5.1 Premium (12W and 14W only)
| Output Current Selection | ||
|---|---|---|
| Input Line Wire (L) | Driver Setting | Output Current |
| L2 (BLK/WHT) | Low | 250mA |
| L1 (BLK) | Medium | 300mA |
| L1 + L2 | High | 360mA |
Documents
MRBK User Manual Applications:
- Factories
- Hospitals
- Offices
- Schools
- Supermarkets
- Warehouses
- Workshops
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. UL tests specific properties of product samples to ensure that they adhere to applicable UL requirements, Standards for Safety, and other national and international organization's standards.
Class 2
Class 2 power supplies must meet the National Electric Code (NEC) and Underwriters Laboratories (UL 1310) standards for wiring requirements and power limitations of AC/DC power supplies to minimize shock or fire risks. All Class 2 power supplies must meet the NEC overcurrent protection and wiring sizing regulations. They must be constructed with ‘In-Wall’ rated wiring for permanent installation inside walls or floors, where they may be surrounded by insulation. These wiring requirements help prevent cracking or melting of the wire, which could cause a fire hazard. These power supplies must have a maximum power capacity of 100 VA and cannot exceed a 30 VAC or 60 VDC output, minimizing the risk of electric shock or overheating from excessive currents.
This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.
Specifications
| Ambient Operating Temperature | -20 to 40 °C (-4 to 104 °F) |
|---|---|
| Beam Angle | 120° |
| Brand | MaxLite |
|
CCT
CCT
|
4000K |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
Class 2, DLC Premium, UL Classified |
|
CRI
CRI
|
80+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
110/125/165 mA @ 120 VAC, 50/55/70 mA @ 277 VAC |
| Dimmable | Yes |
|
Dimmer Type
Dimmer Type
|
0-10V |
| DLC Product ID | S-T65RPN |
| Efficacy | 130 lm/W |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
| Equivalency | 1-lamp 32W T8 Tube |
| Finish | White |
| Input Connection Type | Pigtail |
| LED Color | Natural White |
| Rated Life (L70) | 50000 Hours |
| Length | 48 in. (4 ft) |
| Lens Color | Frosted |
| Lens Type | Polycarbonate |
| Linkable | No |
| Lumens | 1630 Lumens, 1920 Lumens, 2275 Lumens |
| Manufacturer Part Number | MRBK-41LFL-40, MRBK-41LFM-40, MRBK-41LFH-40 |
| Microwave Motion Sensor | None |
| Mount Type | Magnetic Mount |
| Operating Voltage | 120-277 VAC |
| Power Factor | ≥0.9 |
| Product Materials | Aluminum Housing, Polycarbonate Lens, Steel Driver Box |
| Product Weight | 1.5 lb (0.7 kg) |
| UL File Number | E362572 |
| Warranty | 5 Year |
| Wattage | 12 Watts, 14 Watts, 18 Watts |
| Wire Gauge | 18 AWG |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
