Select Connector Type:
Single Channel “T”Dual Channel “T”
Discontinued
In Stock
Starting at $0.75 ea.
Volume price as low as $0.56
Orders Ship Today!  6 Hours and 35 Minutes remaining
Notes
  • Select options to see various notes.

Overview

Easily splice wires without stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

Note: Use pliers to close connector after wires are inserted.

Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.

2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More

Specifications

Amps(max) 10
Connection Type 24 to 18 Gauge Wire
Connector Shape T
Dimensions
Gauge 18 , 20 , 22 , 24
Type Terminal Splice Tap
Voltage Rating 300 volts
   
Package Weight: 0.01oz (0kg)
Package Dimensions: 1" (3cm) x 1" (3cm) x 1" (3cm)
Swipe left to see additional specifications
Part NOIntensityPriceWeightOperating TemperatureLumen Per Dollar
ST1C-2418-$0.75---
ST2C-2418-$1.35---
STxC-2418 - Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel
Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel
STxC-2418 - Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel
Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

Accessories

Reviews

Overall Rating

Total Reviews

3

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
    Mr Socks
  • Technical Level
    Beginner
  • Part Number
    ST1C-2418
  • Reviewed On
    02/07/18

Works great!

We used these to connects led light strips on a bookshelf with five shelves. Didn't want to solder all the connections. Works great. But being amateurs could have used some type of information/directions on how to use. But we did figure it out and was very simple.

Was this review helpful?
10

  • Name
    Melvin
  • Technical Level
    Advanced
  • Part Number
    ST1C-2418
  • Reviewed On
    03/27/18

Works great!

I was looking for a way to tap into the wiring on my motorcycle so that I could add some LED lights. I didn't want to tap in multiple times just to add one set of lights, and everyone knows that it takes two wires to set up lights, one for the hot and one for the ground. One of these two-wire taps worked great! If you have 18 gauge wires in your bike the connection is tight. You probably will need to use a wire crimping tool to squeeze the tap until it clicks securely. If you are using 20 gauge wires you will have no problem. Still, you should always make sure it locks.

Was this review helpful?
00

  • Name
    Anonymous
  • Technical Level
    Advanced
  • Part Number
    ST1C-2418
  • Reviewed On
    03/14/18

Too difficult to use

I bought 2 of T taps for a new installation for under cabinet lighting. I used these rather than wire nuts thinking it would be a more secure and professional looking connection. The wires were difficult to install, especially the 4 wires across the top of the T. It was also difficult to get the closure to snap closed. (I am using 24 AWG cable. The T taps are listed as having capability up to 18 AWG cable.) Finally, I wasted over an hour trouble shooting my non-working LED strips only to find that I did not have conductivity through the Tt taps. I am throwing them away and using wire nuts.

LED Light Staff Response

Connectors work better when wire is stripped and the connector is closed using a plier.

Was this review helpful?
01


Send us your Feedback