Tunable White LED Strip Light Kit - Color Temperature Changing 24V LED Tape Light - 511 Lumens/ft.

Part Number: NFLSK-VCTH1200
18 photos
Discontinued
In Stock
$179.95 / kit
Volume price as low as $134.96
Orders Ship Today!  12 Hours and 5 Minutes remaining
Notes
  • Select options to see various notes.

Overview

This tunable white LED light strip kit is perfect for cabinet lighting, under-cabinet lighting, toe-kick lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, bias lighting, or for other indoor applications where space is limited. The kit includes a tunable white LED light strip with color temperatures ranging from 2700K to 6000K, an LED controller with wireless RF remote, and a UL-Listed 24V power supply. Use the RF remote to adjust brightness and/or color temperature from greater than 50' away in open air. The flexible light strip has 1200 LEDs (600 cool white and 600 warm white) that emit a wide 180° viewing angle. Reeled LED strip is 16-1/2' long and can be cut into 6-LED segments. Easy installation with peel-and-stick 3M VHB adhesive backing. The non-weatherproof strip has 24V DC operation and is designed to last 30,000 hours.

RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Tunable White LED Strip Light Kit - Color Temperature Changing 24V LED Tape Light - 511 Lumens/ft. - NFLSK-VCTH1200
 Applications
Task Lighting
Accent Lighting
Retail Lighting
Cove LED Lighting
Under-Cabinet Lighting
LED Display Case Lighting
Trade Show Lighting
 Product Documentation

Voltage
24-Volt DC Operation
Designed for Low Voltage Applications

LEDs in NFLSK-VCTH1200 will last
Longevity
Will Outlast Dozens of Incandescent Bulbs

High Output
Up To 511 Lumens of Light Output Per Foot

Dimmable
Dimmable
Light Can Be Dimmed For Varying Levels Of Intensity

Adhesive Backing
Adhesive Backing
Easy Install - Peel-And-Stick Backing

Cut Into Strips
Cut Into Strips
Can Be Easily Cut Into 12-LED Segments

Pre-test and Configure
Remove strip from reel and make connections to power supply and controller (see diagram below). Turn on strip using the included remote controller to ensure proper operation of the strip, power supply, controller, and remote.
Choose a suitable location for the power supply and controller, For use in dry locations only.
Ensure all installation surfaces are clean and dry.
Begin to remove strip’s backing while adhering to desired mounting surface. Press firmly to secure strips to surface. Mount controller and power supply to a suitable location.
remote
 Product Documentation
Safety
  • DO NOT connect controller or strips directly to 120 VAC power. This controller requires a 24 VDC power supply.
  • DO NOT exceed max load of 12 Amps, overloading the controller may cause overheating, shorting, and possibly failure of controller.
  • Be sure the power supply is not plugged into an outlet before connecting or disconnecting any of the systems components.
  • DO NOT expose the controller and light strip to direct or indirect moisture.
  • Always observe proper polarity when connecting power and load.
Controller Functions
1: Turn On/Standby
Press 'I' key to turn on unit or press 'O' key to turn off. Retains last setting between power off and power on.
2: Color Temperature Adjust
To control color temperature, press 'C /T+' key to increase color temperature by increasing the cool white channel output power and decreasing warm white channel output power. Press ' C /T-' key to lower color temperature by increasing warm white channel output power and decreasing cool white channel output power. The overall brightness will remain unchanged when adjusting color temperature.
3: Brightness Adjust
Press 'BRIGHT+' key to increase brightness and 'BRIGHT-' to decrease brightness. The color temperature will remain unchanged when adjusting brightness.
4: Brightness Shortcut
Press one of the shortcut buttons to set the relative shortcut brightness level. 3 shortcut keys '10%' , '50%' and '100%' are available.
5: Color Temperature Shortcut
Press one of the shortcut buttons to directly select the relative color temperature. 3 shortcut keys 'Warm, 'Neutral' and 'Cold' are available. 'Warm' and 'Cold' is pure warm or cool output, 'Neutral' is half warm and half cool output.
6: Wireless Remote LED Indicator
Flashes blue when remote is operating to indicate that the remote is functioning properly.
remote
Controller Pairing Instructions
The MCBRF-VCT7 features RF remote to controller device pairing to help eliminate interference from other nearby units. If you wish to change several controller devices from a single RF remote, the controllers must first be re-programmed.
Once programmed you can provide power as you would otherwise, sharing is only needed for the programming phase to ease the process. Re-programming can be done one device at a time also.
Programming Procedure
The remote and controller unit are 1 to 1 paired as default. Further more, one main unit can be paired to 5 remotes and every remote controller can be paired to any main unit.
Please do the following steps to pair a new remote to the controller.
  1. Remove power from the controller and restore power again after 5 seconds.
  2. Press remote ‘C/T+’ and ‘C/T-’ key together in 5 seconds after power is restored. After this operation, the main unit indicator will flash white 3 times, the master unit now recognizes the new remote. Only 5 latest paired remotes can be recognized by the main unit.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Specifications

Current Draw @ 24 Volts DC[1] 2970mA
Dimmable Yes
IP Rating Non-Weatherproof
LED Color Tunable White
Total Length 196.9in (16.40ft)
Remote Control Radio Frequency (RF)
SMD Density 73 SMDs/ft.
Special Features Complete Kit, Remote Control
Standards And Certifications RoHS Compliant
Strip Width 10mm (0.39in)
Suitable for Vehicles No
Operating Voltage Range 100~240 VAC
Wattage Per Foot 4.5 Watts
   
Package Weight: 1oz (0.03kg)
Package Dimensions: 10.6" (27cm) x 5.95" (15cm) x 5.95" (15cm)
All specifications are subject to change without notice.
1. Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
 Product Documentation
Strip Specifications
Full Length 196.9in (16.40ft)
Section Length 2 Inches
Strip Width 10mm (0.39in)
Input Voltage 24 VDC
Total Power Consumption 71 Watts
Number of LEDs 1200 LEDs
LEDs per Segment 6
LED Color Tunable White
LED Type 2016 SMD
LED Lifetime 30000 Hours
Beam Angle 180 degree
Intensity 511 lm/ft
Strip Finish White
Polarity Sensitive Yes
Wire Length 8in(20.3cm)
Controller Specifications
Input Voltage 5 ~ 24 VDC
Rated Current 7 Amps/CH x 2 Channels
Remote Specifications
Type Radio Frequency (RF)
Maximum Range Up to 15m (Optimum)
Battery Type 1 x CR2025
Power Supply Specifications
Input Voltage 100 ~ 240 VAC
Input Frequency 47 ~ 63 Hz
Output Voltage 24 VDC
Output Current 2500mA
Power 60 Watts Maximum
Wire Length 59in(150cm)

Accessories

Reviews

Overall Rating

Total Reviews

3

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
    Donald
  • Technical Level
    Average
  • Part Number
    NFLSK-VCTH1200
  • Reviewed On
    10/18/17

good product and price for the kit

kit includes all you need to install; LED light strip, converter, remote, etc plus provides multiple option for lighting intensity via the remote. The only issue id no instructions on how to prepare strip ends when using the optional connectors

Was this review helpful?
10

  • Name
    Bryan
  • Technical Level
    Advanced
  • Part Number
    NFLSK-VCTH1200
  • Reviewed On
    02/19/18

Great light, may need soldering skills

I'm so thrilled with this light strip! It works just as the description says. One feature that is not documented and was important to me is the ability of the strip to turn on to its previous state using a switched outlet (not the remote). It does! I just built a home and had a switched receptacle installed in my cabinets just for this purpose. The wiring diagram is not well documented either (but it looks pretty), especially if you're wiring separate strips. So, if you have no electrical experience, get someone else to do this for you.

Minus one star for installation difficulty. I bought the optional connector pigtails, but they had poor connection strength/insertion. I was not confident they would stay connected to the strip, so I opted to solder my wire extensions to the strips. One more complaint is the whining of the power supply when on neutral color (all LED's ON) and full brightness. Fortunately I like warm, so it doesn't whine noticeably at my desired setting.

Was this review helpful?
00

  • Name
    Jack
  • Technical Level
    Average
  • Part Number
    NFLSK-VCTH1200
  • Reviewed On
    01/20/18

great product

Quality product. Easy to in install. Will buy again when I need to.liked the dimable feature, the warm or bright light.Just a great product!!!

Was this review helpful?
00

Send us your Feedback