12 Volt LED Car Bulbs
LED Light Strips & Light Bars
LED Household Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Truck Lights
LED Work Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
Boat, RV, and Other Lighting
LED Flashlights & Flashlight Bulbs
LED Grow Lights & Aquarium Lights
Industrial LED Lighting
Hotel & Casino Lighting
LED Light Strips with Multi Color + White LEDs - LED Tape Light with 18 SMDs/ft., 3 Chip RGBW SMD LED 5050
- Select options to see various notes.
|25 - 49 pieces||$166.20 to $170.95 each|
|50 - 99 pieces||$157.45 to $161.95 each|
|100 - 249 pieces||$139.96 to $143.96 each|
|250 - 499 pieces||$131.21 to $134.96 each|
|500 + pieces||$122.47 to $125.97 each|
|For discount information or inquiring about larger quantity pricing, click here|
Add to Wishlist
Adding product to your Wishlist
There was a problem adding this product to your list. Make sure that you have chosen the necessary options (length, color, etc) and try again
If the problem persists, you can contact us directly
This product has been discontinued.
NFLS-RGBW300X3 series Non-weatherproof flexible LED light strip with alternating RGB Color Changing and White high power 5050SMD LEDs. 5 meter (197 in) length with white finish and adhesive backing, can be cut into 6-LED segments. 12VDC operation. Available in RGB+Natural White, RGB+Cool White or RGB+Warm White. Dimmable - See compatible LED dimmers.
Standards and Certifications
RGBW LED Strip with Multi Color + White LEDs
LED Tape Light with 18 LEDs per Foot
3-Chip 5050 SMD RGB and White LEDs
- Back lighting
- Cove LED lighting
- Display case LED lighting
- Accent LED lights
- Under cabinet lighting
|Beam Angle||180 degree|
|Number of LEDs in Unit||300 LEDs|
|LED Type||5050 SMD|
|LEDs per Segment||6|
|Length (in)||196.9in (16.40ft)|
|Lumen Per Foot||265 lm/ft|
|Lumen Per LED||9 RGB / 20 White|
|MCD Per Foot||42170 mcd/ft|
|MCD Per LED||1400 RGB / 3200 White|
|Price Per Foot||13.15|
|Standards And Certifications||CE/FCC/ROHS Compliant/UL Listed|
|Strip Width||14mm (0.55in.)|
|Suitable for Vehicles||Yes|
|Type||Flexible Light Strips/High Density|
|Operating Voltage Range||11~14.8 VDC|
Dimensions: 500cm(196.85") x 1.4cm(0.55") x 0.215cm(0.08")
All specifications are subject to change without notice.
2. Max Run (or maximum run) is used to recommend the total number of devices that can run in succession without experiencing dimming due to excessive voltage drop in a series circuit (end to end). When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|Part NO||Total Length||Emitting Color||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw per Foot @ 12 Volts DC |
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|Current Draw @ 12 Volts DC |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|NFLS-RGBCW300X3-WHT||196.9in (16.40ft)||RGB+Cool White||6000 K||4350 lm||-||-||290 mA|
|NFLS-RGBWW300X3-WHT||196.9in (16.40ft)||RGB+Warm White||2900 K||4350 lm||-||-||228 mA|
|NFLS-RGBNW300X3-WHT||196.9in (16.40ft)||RGB+Natural White||4000 K||4350 lm||-||-||290 mA|
|Foot||50mA (0.050A)||57mA (0.057A)||55mA (0.055A)||129mA (0.129A)||237mA (0.237A)|
|1/2 Meter (19.7")||83mA (0.083A)||94mA (0.094A)||90mA (0.090A)||213mA (0.213A)||390mA (0.390A)|
|5 Meter (197")||830mA (0.830A)||940mA (0.940A)||900mA (0.900A)||2130mA (2.130A)||3900mA (3.9A)|
- Recommended Products
- Wire Connectors
- Power Wires
- Power Supplies
Use our Calculator
Use our calculator.
Use our Calculator
Use our calculator.
There are no reviews for this product yet.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.