12 Volt LED Car Bulbs
LED Light Strips & Light Bars
LED Household Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Truck Lights
LED Work Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
Boat, RV, and Other Lighting
LED Flashlights & Flashlight Bulbs
Industrial LED Lighting
Specialty LED Lighting
Hotel & Casino Lighting
Outdoor LED Light Strips with Multi Color LEDs - Weatherproof LED Tape Light with 9 SMDs/ft., 3 Chip RGB SMD LED 5050
- Select options to see various notes.
- Please select options for quantity discount information
|For discount information or inquiring about larger quantity pricing, click here|
Add to Wishlist
Adding product to your Wishlist
There was a problem adding this product to your list. Make sure that you have chosen the necessary options (length, color, etc) and try again
If the problem persists, you can contact us directly
This product has been discontinued.
WFLS-RGB series weatherproof flexible LED light strip with high power 5050SMD RGB LEDs. Available in 5 meter (197 in), 1 meter (39 in), and 1/2 meter (19.5 in) weatherproof flexible light strips with adhesive backing, can be cut into 3-LED segments. No RGB controller on board, strips have separate RGB power inputs and common anode wire, Use any of our Universal RGB Controllers to dynamically control the strips - Due to voltage drop, after 10 meters run wire back to source. 12VDC operation. Available in High Density version. Dimmable - See compatible LED dimmers.
Standards and Certifications
Outdoor RGB LED Strips with Multi Color LEDs
Weatherproof LED Tape Light with 9 LEDs per Foot
3-Chip 5050 SMD RGB LEDs
- Boat/Marine lighting
- Pool/Deck LED lights
- Stair/Walkway LED Lighting
- Retail/sign LED lighting
- Outdoor LED lighting
- RV LED LightsS
- 5050SMD RGB LEDs
- 180 degree
- 2010 Lumen
- 12VDC operation
- Adhesive backing
- Dimmable - See our Dimmer Selection
- Can be cut into 3-LED segments
|Beam Angle||180 degree|
|Water Resistance||Weatherproof IP65|
|LED Lifetime||40000 Hours|
|LED Type||5050 SMD|
|LEDs per Segment||3|
|Lumen Per Foot||122 lm/ft|
|Lumen Per LED||13.4 Lumen|
|MCD Per LED||2132|
|Standards And Certifications||CE/FCC/ISA Approved/ROHS Compliant/UL Listed|
|Strip Width||12mm (0.47in.)|
|Suitable for Vehicles||Yes|
|Type||Flexible Light Strips/Standard|
|Operating Voltage Range||9~14.8 VDC|
|Wavelength||470 nm/525 nm/626 nm|
All specifications are subject to change without notice.
|Part NO||Number of LEDs in Unit||Total Length||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw per Foot @ 12 Volts DC |
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|Current Draw @ 12 Volts DC |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|Max Run |
Max Run (or maximum run) is used to recommend the total number of devices that can run in succession without experiencing dimming due to excessive voltage drop in a series circuit (end to end). When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|WFLS-RGB15-DI||15||19.7in (1.64ft)||470/525/626 nm||201 lm||-||-||124 mA|
|WFLS-RGB30-DI||30||39.4in (3.28ft)||470/525/626 nm||402 lm||-||-||124 mA|
|WFLS-RGB150-DI||150||196.9in (16.40ft)||470/525/626 nm||2010 lm||-||-||113 mA|
|WFLS-RGB150-WHT||150||196.9in (16.40ft)||470/525/626 nm||2010 lm||-||-||113 mA|
|WFLS-RGB15-BK||15||19.7in (1.64ft)||470/525/626 nm||201 lm||-||-||124 mA|
|WFLS-RGB150-BK||150||196.9in (16.40ft)||470/525/626 nm||2010 lm||-||-||113 mA|
|WFLS-RGB30-BK||30||39.4in (3.28ft)||470/525/626 nm||402 lm||-||-||124 mA|
|WFLS-RGB15-WHT||15||19.7in (1.64ft)||470/525/626 nm||201 lm||-||-||124 mA|
|WFLS-RGB30-WHT||30||39.4in (3.28ft)||470/525/626 nm||402 lm||-||-||124 mA|
|Lengths||Red||Green||Blue||White (All Channels)|
|Foot||44mA (0.044A)||49mA (0.049A)||46mA (0.046A)||125mA (0.125A)|
|1/2 Meter (19.7")||72mA (0.072A)||81mA (0.081A)||75mA (0.075A)||206mA (0.206A)|
|5 Meter (197")||720mA (0.720A)||810mA (0.810A)||750mA (0.750A)||2060mA (2.060A)|
Use our Calculator
Use our calculator.
Use our Calculator
Use our calculator.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.