1157 LED Bulb w/ Removable Lens - Dual Function 3 High Power LED - BAY15D Bulb
Amber- Not sold in pairs, price per bulb.
Overview
LED replacement bulbs can fit vehicle tail lights, brake lights, reverse lights, turn signals or side marker lights. This 1157 dual-contact, dual-function bulb has 3 high-power LEDs (1.3-watt) and a 90° viewing angle lens that is removable to create a 130° viewing angle. BAY15D 15-mm bayonet base for easy plug-and-play installation—just twist to lock in place. The energy-efficient bulb operates within a wide 9-14.5V DC range and is designed to last 20,000 hours on your car, truck, SUV, or van—17 times longer than incandescent bulbs. Available in cool white, amber and red. Not sold in pairs. Price per bulb.
Specifications
Bulbs have Plus and Minus (like batteries) and will only work when polarity is correct. If bulb does not work when installed, turn it around in the socket.
Polarity Sensitive (NO)
Bulbs do not have Plus and Minus and will work either way installed in the socket.
| Part NO | CCT / Wavelength | Brightness | Current Draw @ Operating Voltage | Price Ea. | Product Weight | Operating Temperature | |
|---|---|---|---|---|---|---|---|
| 1157-R3X1W | 617 nm | 28900 mcd | 0.16A | (Discontinued) | - | - | |
| 1157-A3X1W | 590 nm | 27600 mcd | 0.16A | $2.88 | - | - | |
| 1157-W3X1W | 7100 K | 135 lm | 0.21A | (Discontinued) | - | - |
Accessories
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Good brake light replacments
I got two of these for my motorcycle (2006 Kawasaki Concours). I wanted something a little brighter, more reliable, and that took less power since the alternator on the Concours is a little small for a bike that size. When I got them, I put just one in at first so that I could compare it with the incandescent. This is subjective I know, but to my eyes it looked like the LED bulb was about 20% brighter in both modes. The difference between running-light and brake-light mode was similar to the incan. Probably still too expensive for general automotive use, but on a motorcycle where you only have one tail-light and want to be seen, it's well worth it.
Good enough for my needs
I bought these for the front turn signals on my HD Trike. The Normal 1157-A bulbs melted the lense. I figured these would be cooler and not melt the lense. They work in that reguard. They do make my turn signals flash faster. I dont see that as a problem (yet)
They are not much if any brighter than the 1157-A, but they are bright enough, and look good.
The issue I had was the bulb separated from the base easily while installing them, and I had a little trouble getting the base out of the socket. I anticipated this after reading reviews from others. I ordered 3 bulbs when I needed 2. (2 out of 3 aint bad) That worked out.
Overall it was about like I expected, and so far I am satisfied.
