Overview
LED replacement bulbs can fit motorcycle tail lights and brake lights while doubling as a license plate light. This 1157 dual-contact, dual-function bulb has 25 LEDs (3-mm and 5-mm). 19 Red LEDs aim forward from tail lights and brighten when brakes are engaged, and 6 radially mounted cool white LEDs illuminate your license plate. BAY15D 15-mm bayonet base for easy plug-and-play installation—just twist to lock in place. The energy-efficient bulb operates within a wide 9-14.8V DC range and is designed to last 50,000 hours on your motorcycle—42 times longer than incandescent bulbs. Not sold in pairs. Price per bulb.
- 12VDC motorcycle tail/brake application with license plate illumination function
- On high setting: 65 Lumen with 110mA current draw
- On low setting: 38 Lumen with 60mA current draw
9~14.8 VDC
Easy At Home Installation
65 Lumens of Cool White Light
Will Outlast Dozens of Incandescent Bulbs
View All
View All
View All
Specifications
Bulbs have Plus and Minus (like batteries) and will only work when polarity is correct. If bulb does not work when installed, turn it around in the socket.
Polarity Sensitive (NO)
Bulbs do not have Plus and Minus and will work either way installed in the socket.
Accessories
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
-
NameBrian
-
Technical LevelExpert
-
Part Number1157-R19W6
-
Reviewed On06/03/13
-
NameMatthew
-
Technical LevelAdvanced
-
Part Number1157-R19W6
-
Reviewed On10/04/13
Brake light replacement
I have a 1982 Yamaha and these bulbs work perfect I was afraid I would need a LED compatible Flasher or Load Resistor but no problems. They aren't much brighter than stock but the red is much bolder. Also my brake light illuminate the license plate and there are clear LED's on the perimeter that light the plate and do not get brighter when the brake is pressed. It also makes my brake light bar more visible. Great product especially for older machines.
-
NameRobert
-
Technical LevelAdvanced
-
Part Number1157-R19W6
-
Reviewed On03/27/14
What a difference!
I initially purchased this bulb for installation on my Unigo motorcycle trailer, running/brake light combo. After reading reviews on the product, I purchased two more for the running light and brake light on my BMW K1200lt. They made a huge difference in daytime visibility. I'm very glad that I made the decision. I would highly recommend!
-
NameJason
-
Technical LevelAdvanced
-
Part Number1157-R19W6
-
Reviewed On04/15/15
Perfect replacement for standard bulbs
These bulbs are great, and are actually brighter than the incandescent bulbs I replaced, and the contrast between running light and brake light is just as good as standard bulbs. The only drawback is that while they match the size of most 1157 bulbs, they are not small enough to replace bay15D sized bulbs, which is what I have on my bike. I was able to cut away the housing of the bulb to lower the height, but managed to nick the circuit board on one of them, and ruined the bright mode. My fault! I'll have to either buy another one and be more careful or find a bay15D size on here.
-
Namefrank
-
Technical LevelAdvanced
-
Part Number1157-R19W6
-
Reviewed On05/02/15
